Community
Buy / Sell
Bronco Tech
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.
Discuss it more here:
http://classicbroncos.com/forums/showthread.php?p=514932 -
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
Explorer serp complete
- Thread starter nvrstuk
- Start date
- Status
OP
OP
Fish-
Like most of us, as little as possible!
I'm hoping only a couple hundred. I don't need the accessories but would pay a bit more if it came with them.
Do you have access to one or more?
Keith-
Exploder front serp setup's are shorter than 'stangs. More room btw rad and wtr pump. What's good for one rig isn't neccessarily good for someone else's but I'm going to dual electric fans on variable speed thermostats and want more room
Like most of us, as little as possible!
I'm hoping only a couple hundred. I don't need the accessories but would pay a bit more if it came with them.
Do you have access to one or more?
Keith-
Exploder front serp setup's are shorter than 'stangs. More room btw rad and wtr pump. What's good for one rig isn't neccessarily good for someone else's but I'm going to dual electric fans on variable speed thermostats and want more room
- Joined
- Jul 15, 2006
- Messages
- 3,429
I have a set that I paid $400 for with the shipping. I would have to check and see but I think it was complete with accessories.
- Joined
- Jul 15, 2006
- Messages
- 3,429
I will have to unpack and verify what is actually there. This is what I paid for that is supposed to be included in the boxes:
flywheel
harmonic balancer
crank pick-up
cam pick-up
cam
coil pack
A/C compressor
Alternator
Power Steering pump
oil cooler
deep sump oil pick-up tube
cast oil pan
fuel rail
fan with clutch
motor mounts
heater hoses
assorted hoses and soleniods.
NRT1 computer.
flywheel
harmonic balancer
crank pick-up
cam pick-up
cam
coil pack
A/C compressor
Alternator
Power Steering pump
oil cooler
deep sump oil pick-up tube
cast oil pan
fuel rail
fan with clutch
motor mounts
heater hoses
assorted hoses and soleniods.
NRT1 computer.
OP
OP
Question: do the boxes have a front timing chain cover?
PM me...
The new ft cover was about 90 bucks (and you must have it and most salvage yards wont let you pull it off) and a new WP was 75 or so from Rockauto.com.The brackets were 150 and included the PS reservoir,balancer,tensioner and A/C Compressor for OBA.40 bucks each for the Alt and PS Pump and lots of time and effort to get all the right bolts.You will still need a WP Pulley also.
PM me...
The new ft cover was about 90 bucks (and you must have it and most salvage yards wont let you pull it off) and a new WP was 75 or so from Rockauto.com.The brackets were 150 and included the PS reservoir,balancer,tensioner and A/C Compressor for OBA.40 bucks each for the Alt and PS Pump and lots of time and effort to get all the right bolts.You will still need a WP Pulley also.
- Status
Similar threads
