jperry1290
Sr. Member
- Joined
- Jul 1, 2010
- Messages
- 920
Can you buy LED lights that are plug and play or is there something special needed to make it work?
If you are going to use a mix of bulb types then you will need to add resistors to the LED bulb pigtails.
Ah man thats cool! I might swap mine out. Need to make sure mine dont click first.I used many of the same bulbs as JefeAZ from superbright. the flasher module i ended up with is CEC Industries EF32RL Flasher. Liked it because it makes the clicking noise... other replacement flashers are silent. If it matters to you,might be worth a look...
Can you shoot me (or post it here) a picture of the “cool white” license plate light at night? I’m trying to decide which lumens / color to go with (cool, natural or warm)I replaced everything but the headlights with LEDs from SuperBrightLEDs. Was about $85 total
1157-NW27-T-2PK Natural White - Signals/Brakes
1156-NW27-T-2PK 420 Lumens - Reverse
194-NWHP5 Natural 4100K - Markers
1142-CW12-G 107 Lumens - License
2 DOCA Flasher Relay 12V Heavy Duty (Amazon)
67-W15 are under dash courtesy lights for my American Autowire Harness
![]()
just preference or did you see issues with resistors?I had to retain the regular front turn signal bulbs when I ran rear led brake lights , I didn’t want to add resistors..
I did the led flasher that and it didn’t work not sure why. Tried it
everything is led except the front two blinker bulbs and the flashers and blinkers work fine.
I didn’t want to cut anything up either