F150 Front Disc Conversion

[hc37180]

Ok still trying to get a handle on compatibility for this front disc conversion. I have a bead on a complete disc setup from a 79' F150 supercab and am currently waiting to see if it is 4x4 or not although from what I can see in the ads pics it does NOT have hubs on the front.

Will the knuckles and everything else swap over to the D44 of my Bronco from the front of a non 4x4 F150 or did Ford run different parts for those trucks? I only am aware of the situation with the F150 4X4 so any info would be greatly appreciated. I hadn't seen any reference in the Tech articles about it needing to come off of a 4X4 F150.
Thx

 

[TwoDalesDad]

The hubs you want...That is IF YOU WANT FOUR WHEEL DRIVE.....NEED TO COME OFF OF A FOUR WHEEL DRIVE TRUCK....

 

[hc37180]

Thanks for the response, that's what I thought but couldn't find anything that specifically stated that. Other than the hubs though parts are the same? I don't want to pass this up if the knuckles calipers etc are the same and can be useable.
Thx

The hubs you want...That is IF YOU WANT FOUR WHEEL DRIVE.....NEED TO COME OFF OF A FOUR WHEEL DRIVE TRUCK....

 

[thegreatjustino]

Two wheel drive brakes are worthless. Won't interchange onto a 4x4 solid front axle.

 

[bmc69]

The calipers are the only common part between F-150 2x4 and 4x4...and I would never resuse old calipers anyway when remans are $35 each.