• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fender Flairs mounted with adhesive

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Has anyone ever mounted fender flairs (or the Bronco logo) with an removable adhesive instead of bolts/screws? I've seen other cars with their logo's and "spoilers" attached with adhesive and was wondering if you could do the same with the flairs. On logos, you can pry them off and take the adhesive off with a cleaner, then apply a new one.
 

Lennardlector

Contributor
Full Member
Joined
Mar 21, 2010
Messages
183
Loc.
Virginia Beach
If the inside mounting face is large enough (at least 1/2 inch)
You can but I don't see why you would want too.

Emblems are small and come pre-stickered, the mini wings you find like on an M3 are more for show and provide no actual downforce or it would fly off at speed.

It can be done but I like mine riveted in.
 

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
We just had a product demo at work on a new 3M extreme two sided tape. It was impossible to separate the two surfaces they stuck together. I 've used the gray variety on a lot of projects with good results,but this new stuff is amazing. I would be afraid of the new stuff,you better get it where you want it the first time,cuz it's ment to be a permenent fix.
 

Fireball05

Bronco Guru
Joined
Oct 7, 2012
Messages
1,822
The Bronco logo could be attached with double sided tape, much like new cars have their emblems attached.

Not sure I'd do that for flares though!
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Some body shops are using adhesive instead of welding to attach metal panels. Even big panels like bedsides. The adhesive has a far greater bond strength than the tensile strength of the metal panels. No welding can reduce potential rust due to spot/lap welding.

This adhesive could easily attach eb flares but how the hell would you ever remove them haha.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
3M VHB (Very High Bond) Good stuff. What GoPro uses for the self adheasive camera mounts. Avoid high heat, that is about the only way to get it off after it is stuck in place.
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
Some body shops are using adhesive instead of welding to attach metal panels. Even big panels like bedsides. The adhesive has a far greater bond strength than the tensile strength of the metal panels. No welding can reduce potential rust due to spot/lap welding.

This adhesive could easily attach eb flares but how the hell would you ever remove them haha.

The adhesive is heated and it releases. 150 degrees or so. You would ruin the flairs unless you heated it from the back of the panel. Also, I'm not sure how well it would hold since it's made to bond to bare metal. Next time I see a body man using it I'll dab some on an old fender and bond a piece of urethane bumper to it and see how well it holds.
 
OP
OP
AZ73

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
Thanks all. I like the #10 button heads, but I thought adhesive might give it a more streamlined, finished look, especially if I'm painting the flairs. I hadn't thought about the welting which would have to be left off. That probably dictates using bolts instead.
 
Top