FOMOCO Radiator Hose

[jabshire]

Anyone know where I can get this reproduction radiator hose set. Looks like it has a C8TA-8280-A part number on the upper,can't see number on lower. Probably a classic Mustang repop but it looks way cool.
Thanks
Jarrod

 

[Major Tom]

try CJ pony parts

 

[eaglenest66]

Anyone know where I can get this reproduction radiator hose set. Looks like it has a C8TA-8280-A part number on the upper,can't see number on lower. Probably a classic Mustang repop but it looks way cool.
Thanks
Jarrod

Jarrod, by the looks of the picture, those are the ones I did several years ago with Kevin at Marti Auto Works. I am assuming you are looking for the '66 six cylinder?! We also did the correct fan belt and battery/starter cables. All are available on his website along with some other goodies. Tim

 

[Major Tom]

I believe a c8 part # is for a 1968

 

[eaglenest66]

Tom, I realize part numbers (engineering numbers actually) and years tied to them. He is guessing the number on this hose. The photo is not real clear. Btw, I am assuming it's for the '66 six cylinder since the photo shows that and the offset radiator cap is a dead giveaway. Here is a better one to see. Jarrod, is this correct? tim

 

[77Bronco636]

Anyone know where I can get this reproduction radiator hose set. Looks like it has a C8TA-8280-A part number on the upper,can't see number on lower. Probably a classic Mustang repop but it looks way cool.
Thanks
Jarrod

Jarrod
Where is that pic from, I may know what truck that is......
I did get a set of the hoses from Tim a few years back and they were very nice...
Paul

 

[tirewater]

Tom, I realize part numbers (engineering numbers actually) and years tied to them. He is guessing the number on this hose. The photo is not real clear. Btw, I am assuming it's for the '66 six cylinder since the photo shows that and the offset radiator cap is a dead giveaway. Here is a better one to see. Jarrod, is this correct? tim

I'm surprised Ford allowed use of the FoMoCo trademark. They're generally protective with the FoMoCo labeling, as well as the little oval with Ford in it stamp. Likely something to do with the close ties between Marti and Ford?

 

[eaglenest66]

I'm surprised Ford allowed use of the FoMoCo trademark. They're generally protective with the FoMoCo labeling, as well as the little oval with Ford in it stamp. Likely something to do with the close ties between Marti and Ford?

Marti is "officially licensed" to do so.

 

[jabshire]

Guys, sorry I lost track of this post. Tim is correct. These are from Marti Auto Works, for the 170 6 cyl. I purchased the fan belt , battery/starter cables, fuel/gas hose and heater hose also. Quality is excellent. The pic was from a past Mecum auction. Thanks for the help.
Jarrod