• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ford Transfercase ident? (time sensitive)

PsYcHoBrOnCo

Sr. Member
Joined
Oct 3, 2005
Messages
575
Loc.
Fort Worth, Tx
I have a 74 f150 here at work, it has a divorced TC....is this something I might consider keeping? Or is that particular model not useful for us?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
No real value to a Bronco. There just isn't enough room under the rigs to fit that much length.
 
OP
OP
PsYcHoBrOnCo

PsYcHoBrOnCo

Sr. Member
Joined
Oct 3, 2005
Messages
575
Loc.
Fort Worth, Tx
I guess I should of asked...1: what TC is it and 2: I'm guessing this is not one that would be used in the 205-203 doubler set up.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I have a 74 f150 here at work, it has a divorced TC....is this something I might consider keeping? Or is that particular model not useful for us?

Interesting that a '74 half ton (should be an F100, not F150) would have a divorced t-case. The half tons usually used a D21 single speed behind the 435 4 speeds. If it's an automatic, it likely has a fulltime 4WD? and would be a NP203. The F250 3/4-ton trucks used the divorced D24 2 speed transfer case. They had about a 2:1 low range iirc and aren't desirable for the Bronco for any reason.

Todd Z.
 
OP
OP
PsYcHoBrOnCo

PsYcHoBrOnCo

Sr. Member
Joined
Oct 3, 2005
Messages
575
Loc.
Fort Worth, Tx
Interesting that a '74 half ton (should be an F100, not F150) would have a divorced t-case. The half tons usually used a D21 single speed behind the 435 4 speeds. If it's an automatic, it likely has a fulltime 4WD? and would be a NP203. The F250 3/4-ton trucks used the divorced D24 2 speed transfer case. They had about a 2:1 low range iirc and aren't desirable for the Bronco for any reason.

Todd Z.
Awesome Todd, thank you....
 
Top