• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Frame Cleaning Equip/Tools

bronco-kid

Jr. Member
Joined
Dec 7, 2009
Messages
102
Loc.
roanoke
think it was black diamond sand??? here is the pressure washerWSI International Sandblasting Kit — 3500 PSI, Model# FC 41069 and the sand price went up wow Item# 155472 and bad 68 is rite ,it makes a BIG mess wear old clothes and safty glasses!!!!!! but whan your done you still have the blaster ,and dont have to haul everything all over town. its your choice what ever you feel is better for you . i have made a few bucks blasting otherpeople stuff so mine has paid for itself .i just blasted a old plow for a guy only used half a bag of sand ,told him to bring 2 bags of sand and $20.00 so i made money and got sand on hand for the next project.
 

bigcountry

Contributor
Bronco Guru
Joined
Nov 3, 2009
Messages
1,206
i just talked to a guy a couple of weeks ago and he will sandblast and spray it with epoxy primer for around $250. That is what i plan to do. I am also going to take him my front and rear axle housings at the same time to him.
 

asinor

Bronco Guru
Joined
May 13, 2011
Messages
1,396
Loc.
Tulsa, OK
I used a little air operated one for my floor pans and probably used 10lbs of glass, it would take for f'ng ever to do a whole frame.

Full coverage clothing, hat, mask and gogles are a must.
 

bronco-kid

Jr. Member
Joined
Dec 7, 2009
Messages
102
Loc.
roanoke
how muck pressure is your air blaster pushing?? my compressor has 150lb ,when you use the water blaster your using 3500lbs BIG diffrence. but its a big mess and you are left with bare wet metal. for me this was the best choice i like to do things myself .everybody is diffrent i put put about $100 to blast my frame ,now i still have the blaster ,only cost me $5 to do my diffs and when i blast the body i am only gonna have to pay for gas and sand.
 

asinor

Bronco Guru
Joined
May 13, 2011
Messages
1,396
Loc.
Tulsa, OK
Nowhere near 3500, nozzle is only rated at 90.

I've got a pressure washer that I could use the kit you did, but I I'm not sure want it all bare and wet.
 

bronco-kid

Jr. Member
Joined
Dec 7, 2009
Messages
102
Loc.
roanoke
i did mine on a warm sunny day had minamal surface rust .after it dried i went over the whole frame with a tiger paw ,smoothed everything up .im happy with what i did .and i still have the blaster for future projects ,money coming in from it....
 
OP
OP
aaronbodell

aaronbodell

New Member
Joined
Nov 3, 2011
Messages
44
Loc.
Olympia
Well thanks to Bad 68 I got the angle grind working with the twisted wire, and that sure speeded things up. I just focused on the rear H beam for a few minutes and I'm down to bare metal.

I'll check out the wet blasting option, as I have the space to do it and make a mess (i.e. not the driveway).

Once everything is down to bare metal, there will have to be some welding done. I assume you can weld thru the epoxy, or should I just wait and weld on bar emetal then get things epoxied?
 

bad 68

Sr. Member
Joined
Jul 1, 2010
Messages
930
Loc.
Northest Washington
I would wire brush every thing you can then if its working good.
Usually, blasting works best for rust, grinders with abrasive discs and wire brushes work best to remove paint that is still adhearing strong.
 
Top