Front 4link

[av8rds]

I'm comfortable with the numbers but I thought I'd run it by a second(third) set of eyes just to have a look.

thoughts?

 

[skipdog69]

Mounting for the lower links inside the frame could pose a mounting problem. Try mounting the axle mounts toward the center of the axle and stretching towards the inside frame.

 

[fdezone]

I'm liking it how it is!

 

[Aggie007]

Are you not running a track bar and full hydraulic steering?

 

[shamu]

Here is my three link. I will probably move the upper bar back and change the heim joint to a nylon style bushing.

 

[av8rds]

Mounting for the lower links inside the frame could pose a mounting problem. Try mounting the axle mounts toward the center of the axle and stretching towards the inside frame.

I'm confused by this statement. My upper links are the straight ones and they are outside the frame?

 

[av8rds]

Are you not running a track bar and full hydraulic steering?

correct that is my plan

 

[fdezone]

What's your front axle?

 

[av8rds]

What's your front axle?

will be a Dana 60 if I make this move. took the 44 out to see how the 60 mocks up currently.

 

[skipdog69]

I meant the lower links and trying them in reverse

 

[av8rds]

I meant the lower links and trying them in reverse

really? never seen that before?

 

[tasker]

so much for going back to a driver?

 

[av8rds]

so much for going back to a driver?

Meh still thinking about putting the 44 back under it and buying a buggy. Guess we'll see.

 

[tasker]

cool, Merry Christmas either way! hope to toss a couple back somtime soon....

 

[DanWheeler]

I'm comfortable with the numbers but I thought I'd run it by a second(third) set of eyes just to have a look.

thoughts?

I'm no expert, but I dont think you have enough triangulation there.

 

[ken75ranger]

I meant the lower links and trying them in reverse

really? never seen that before?

You can do it that way. The problem is getting enough triangulation on a narrow EB frame when you go that route.

If you need a little more triangulation move you upper link axle mount outboard near the knuckle.

 

[hartbronco]

Meh still thinking about putting the 44 back under it and buying a buggy. Guess we'll see.

Maybe You need to think about this some more first? Seems You can't make up Your mind on what to do

 

[av8rds]

Maybe You need to think about this some more first? Seems You can't make up Your mind on what to do

Ha! No kidding right? I have 90% of the parts for the 4link already but I'd really like a buggy.

 

[hartbronco]

Ha! No kidding right? I have 90% of the parts for the 4link already but I'd really like a buggy.

Then do a Bronco Buggy and start a Buggy thread. Then We all could Help You Build it ;D From our computers lol .

 

[shamu]

Then do a Bronco Buggy and start a Buggy thread. Then We all could Help You Build it ;D From our computers lol .

Don't laugh at my build. I am still busy.
http://classicbroncos.com/forums/showthread.php?t=182081