• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Front Bumper Build

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
Got tired of my front tube bumper and had some extra metal laying around so I decided to build a bumper. Not going to get fancy but want a good sturdy Bumper, seen a few I like but this is a design as I go. Started Fri so heres some pictures. Still need to cut the top out for a wench, add some tow rings, and get some kind of a pre runner brush bar.
 

Attachments

  • Bumper Build 001 (Copy).JPG
    Bumper Build 001 (Copy).JPG
    161.4 KB · Views: 374
  • Bumper Build 2 003 (Copy).JPG
    Bumper Build 2 003 (Copy).JPG
    201.1 KB · Views: 356
  • Bumper Build 2 002 (Copy).JPG
    Bumper Build 2 002 (Copy).JPG
    208 KB · Views: 430
  • Bumper Build 010 (Copy).JPG
    Bumper Build 010 (Copy).JPG
    163.3 KB · Views: 353
  • Bumper Build 006 (Copy).JPG
    Bumper Build 006 (Copy).JPG
    193.4 KB · Views: 379
  • Bumper Build 004 (Copy) (2).JPG
    Bumper Build 004 (Copy) (2).JPG
    170.5 KB · Views: 339
  • Bumper Build 005 (Copy).JPG
    Bumper Build 005 (Copy).JPG
    190.9 KB · Views: 377
  • Bumper Build 004 (Copy).JPG
    Bumper Build 004 (Copy).JPG
    215.7 KB · Views: 338

BkDanO

New Member
Joined
Oct 14, 2012
Messages
47
Nice design, I really like how you wrapped the corners. Cant wait to see the finished product! Where do I place my order! ;) I come through Tucson all the time on my way to Bisbee / Sierra Vista where the family is from.
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Lookin Good!

Speaking of wrapped corners, how did you bend that piece of steel to make the end piece? It doesn't look all beat-up, so I'm assuming some kind of hydraulic bender or press?
 
OP
OP
LOVNBRONCOS

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
Thanks guys, I did use a press break at work to bend the end corners, shear came in real handy too. Screwed up when I made the radius end pcs needed 4 only made 2 but I still have the card board template.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
Wow, that looks great. Did you say just decided to whip this together? Nice planning, looking forward to the finished product, what later today. I'd have to think and plan for weeks to just get a cardboard mockup.
 
OP
OP
LOVNBRONCOS

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
Scanman -Really just started building, had a good idea of the look I was after.

Thanks John, I all most called you to have you take some measurements off that Bailie Bilt you have, but then I just winged it. Looks pretty close and that's the look I wanted.
Hope to finish it up next weekend but I need to pick a wench before I start cutting the top out.
 

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
Nice work, I wish I could just whip something up! You going to paint or powder coat it?
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Looks similar to what I built for the 66. Added a front receiver so I could use a cradle mount winch if I need it. I also have the reciever mount clevis for pull point.
 
OP
OP
LOVNBRONCOS

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
Haven't decided on powder coat or rattle can, its going to be black and the rest of the black on the bronco is rattle can and easy to touch up so I will most likely rattle it.
Thought about a receiver but its starting to get heavy so I'm thinking tow points to keep the weight down.
 
OP
OP
LOVNBRONCOS

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
Got most the rough grinding done today, I hate grinding, cleaned up pretty good. Hope to get a lot done Sunday, need to get the frame mounts welded in and make some tow points before football starts. Took some more pics.
 

Attachments

  • Thanksgiving 007 (Copy).jpg
    Thanksgiving 007 (Copy).jpg
    170.8 KB · Views: 202
  • Thanksgiving 009 (Copy).JPG
    Thanksgiving 009 (Copy).JPG
    206.8 KB · Views: 200
  • Thanksgiving 010 (Copy).JPG
    Thanksgiving 010 (Copy).JPG
    255.7 KB · Views: 221
  • Thanksgiving 017 (Copy).JPG
    Thanksgiving 017 (Copy).JPG
    188.8 KB · Views: 213
  • Thanksgiving 012 (Copy).JPG
    Thanksgiving 012 (Copy).JPG
    188.6 KB · Views: 215
  • Thanksgiving 015 (Copy).JPG
    Thanksgiving 015 (Copy).JPG
    204.2 KB · Views: 254

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Man that looks awesome! How does it mount to the frame, is there a horn insert or something?
 
OP
OP
LOVNBRONCOS

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
Didn't get to work on the bumper last Sunday as planed, got dragged off Christmas shopping with the wife, real busy all week nothing done, but I did order a Smittybilt 9500 winch should be here this week, also got the mounts made today but didn't have my camera at the shop with me, when I remove the bumper again this week I will post some pic's of how I mounted it. Started off good but have really got slowed down due to Christmas, Oh well its that time of year
 
OP
OP
LOVNBRONCOS

LOVNBRONCOS

Sr. Member
Joined
Mar 6, 2012
Messages
462
Loc.
Tucson, Az
At this point I would guess @ 13 to 15 hours, yesterday I changed the mounting 3 times before I decided on what I wanted to do, wasted a few hours and a little blood with a cut finger, so far more hours than blood but I still got a ways to go.lol
 
Top