• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Front wheel cylinders

aqua_wonder

New Member
Joined
Sep 11, 2007
Messages
39
Hello, I am in the process of replacing front wheel cylinders on a 72 with a Dana 44. Does anyone have any tips on how to use a line wrench on the hard line at the wheel cylinder? There seems to not be enough room to actually turn the wrench. One solution is to remove the hard line where it attaches to the hose and then pull the line through the backing plate. Any suggestions?
 

nhg2112

New Member
Joined
Dec 25, 2015
Messages
5
Loc.
Chattanooga, TN
If it’s a goofy angle I’ll usually end up hitting the wrench with a torch and bending it to fit what I’m doing. Got more than a few of those in my toolbox now…
 
Top