Fuel/Brake Line Chassis clips????

[jabolen25]

Anyone lead me towards a vendor who has the plastic clips that plug inside frame rails to hold fuel and brake lines? Maybe a part number if available.

thanks,

Jeff

 

[Pa PITT]

PICO.. maybe ..MTM ..HELP ITEMS.

 

[Vintage Steel]

This what you're lookin' for?
http://www.lmctruck.com/icatalog/fbr/375w/0073.jpg
Hope this helps.

 

[Madgyver]

Use the Nylon ties with the hole in it to mount with a screw.
They sell them at Home Depot.

Welcome to the site.
I am madgyver.

 

[jabolen25]

This what you're lookin' for?
http://www.lmctruck.com/icatalog/fbr/375w/0073.jpg
Hope this helps.

Nah....I don't see them there.

 

[jabolen25]

Where is manage attachments so that I can upload picture?

 

[mitzel]

I haven't used them but have seen BC Bronco advertise some custom
blingy clamps that mount brake, fuel, and return line:
http://www.bcbroncos.com/store/product_info.php?cPath=140&products_id=930
http://www.bcbroncos.com/store/product_info.php?cPath=140&products_id=933

Wild Horses has factory style clips for single and double lines
but in stainless rather than plastic. See part #3101, 3102,
3103, 3104 on page:
http://www.wildhorses4x4.com/category/SS_Brake_Hard_Lines

 

[mitzel]

jabolen25
> Where is manage attachments so that I can upload picture?

If you're asking about uploading a picture directly into a thread
then checkout the Sticky thread near top of Bronco Chat forum
"Become a Contributor w/ Photo Uploads"
http://classicbroncos.com/forums/showthread.php?t=34373
Basically you get "Contributor" status by contributing a $12/year
donation to the website, which supports the site and gets you
photo upload and a few other enhancements to your account.

Other option if you have pictures already hosted on another
Internet photosharing site (e.g. your ClassicBroncos album or
Picasa) you can add a http link to there.

 

[DAKOTA7720]

That was my first thought Mitzel. Only downsides I see are cost and the fact that you have to tap the frame. They're unmatched when it comes to a clean install.

 

[jabolen25]

I haven't used them but have seen BC Bronco advertise some custom
blingy clamps that mount brake, fuel, and return line:
http://www.bcbroncos.com/store/product_info.php?cPath=140&products_id=930
http://www.bcbroncos.com/store/product_info.php?cPath=140&products_id=933

Wild Horses has factory style clips for single and double lines
but in stainless rather than plastic. See part #3101, 3102,
3103, 3104 on page:
http://www.wildhorses4x4.com/category/SS_Brake_Hard_Lines

Mitzel wins! Would rather have in plastic but stainless works.

 

[klake575]

i second the stainless they're easy and look good and wont crack when you over tighten them.

 

[chuckinphx]

i used the original ones and tapped the hole, to 5/16 i think, cut 1/8 inch rubber to put on the frame side new bolts(not those snap in things)locktite snugged them up.

 

[grant_71]

I used these...

http://www.summitracing.com/parts/SUM-G1882/