Fuel Senders for 23 Gallon rear and 12 gallon Aux

[dmplatt]

I'm getting ready to pull everything together to fix up the fuel tanks - mostly to make the gauge work for both tanks and to replace some old hoses. Planning to replace both fuel senders while I have the tanks down and not sure where to get the right senders for either tank.

Rear tank is a NWMP 23 gallon.
Aux is metal, maybe 12 gallon, didn't find a label on initial inspection.

Any suggestions?

 

[tatersalad]

There is a guy that is selling a new style one on here that uses the original ohm settings. Just recently saw it.

 

[tatersalad]

https://classicbroncos.com/forums/showthread.php?t=303479&highlight=sending+unit

 

[dmplatt]

Looks like that is for the 23 gallon. Any ideas on the 12?

 

[DirtDonk]

We sell this one for the 12gal NWMP style tanks: https://www.wildhorses4x4.com/product/NWMP_Fuel_Tank_Sending_Unit_12gallon/Bronco_Steel_Fuel_Tanks

Paul

 

[BUCKWILD]

Transfer Flo in Chico,CA can build you a custom one and it is made in there shop and is high quality. Just an option, not the chepest but well made. Replaced an early BC tank uinit with one and it is still in use in that tank 20+ years later

 

[Broncobowsher]

The aux tank, does it have the 5 screws holding the sender in like the 23 gallon tank? If so that is an aftermarket tank and takes an aftermarket sending unit.

But if the aux tank sending unit is held on with one giant nut, you are looking at a stock style sending unit.

What does the aux tank have?