• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Fuse box replacement

ilovemaui

Bronco Guru
Joined
Jul 10, 2010
Messages
1,651
Loc.
Pacific Moist West
I don't want to rewire my rig because everything works but I would like to replace the fuse box with something better. Looking for some suggestions.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
x2. Junkyard is only going to get you either a completely different modern panel, or an old and likely rusty replacement.
Lots of old Ford trucks used the same (or at least very similar) fuse blocks to the EB block, but unless you find a really good one (they do exist, but are kinda rare sometimes) then I would find a modern blade type panel out of another Ford, so that the wiring color codes are the same or similar, and mount it somewhere else besides the glove box.

If you can find a small enough auxiliary panel, I suppose you could keep it in the glovebox if you do some creative "cutting and pasting". ;D, but you're on your own there.
Just keep as much of the harness as you can get with the panel, to make it easier to splice.

Good luck. Lots of good donors out there. Lots of members here actually taking the full fuse box from under the hood on modern cars and trucks and converting the EB to that style of centralized power distribution. And very happy with the results from what I've seen here.

Paul
 

ahansen_1985

Bronco Guru
Joined
Nov 2, 2008
Messages
1,245
Loc.
amity, oregon
Centech has some awesome fuse blocks, mine has key on, and key off fuses, one set on top and bottom, horn and flasher relays built into it, with a stainless cover.... It's pretty nice.... I can post pics of it if you would like


1966,351,m5od,205....3.5" lift, 2" body, 35's,
 
OP
OP
ilovemaui

ilovemaui

Bronco Guru
Joined
Jul 10, 2010
Messages
1,651
Loc.
Pacific Moist West
Centech has some awesome fuse blocks, mine has key on, and key off fuses, one set on top and bottom, horn and flasher relays built into it, with a stainless cover.... It's pretty nice.... I can post pics of it if you would like

Yeah, I'd like to see it. I want t update mine to something more contemporary.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Both Centech and Painless sell not only their own proprietary models, but also the semi-generic ones that a lot of people like. Those are available from many other sources as well.

I think there are a couple of threads hereabouts (maybe one is from ahansen?) showing the ways that some have been laid out.

And x2 on the pics. Like to see them too ahansen. And if you have an existing thread where you talk about it, link to that as well.

Thanks

Paul
 
OP
OP
ilovemaui

ilovemaui

Bronco Guru
Joined
Jul 10, 2010
Messages
1,651
Loc.
Pacific Moist West
The centech one that comes with their Bronco harness looks like a good option. Pretty cheap at $44, so I think I'll order one and see how it works out.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
That's actually a great idea. Should'a thought of it myself.
As long as you find your old wires in good shape still, it should be an easy thing to attach to cleaned and stripped ends.
Also makes it easy to attach the main power leads to on the back. Just a stud and a nut to make for an easy place to attach a ring-terminal.

Let us know how it works out.

Paul
 

ahansen_1985

Bronco Guru
Joined
Nov 2, 2008
Messages
1,245
Loc.
amity, oregon
4c73a78e-39a0-d892.jpg
4c73a78e-39af-8167.jpg
4c73a78e-39c0-b04f.jpg



---
I am here: http://maps.google.com/maps?ll=45.109938,-123.202874
1966,351,m5od,205....3.5" lift, 2" body, 35's,
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
...The centech stuff isn't much if any of an upgrade at all.

I've been thinking about this statement u10072, and I just can't figure it.
Those are sweet fuse panels for sure. I think there are others here using them as well, unless that was you that posted them up the last couple of times too.
But heck, even a basic garden-variety $15 6-fuse ATO panel without a cover is an upgrade over a stock Bronco box!

In fact, I can't think of much that isn't better than a 40 year old rusty and falling apart Bronco box.
Except maybe another broken down old Ford panel that is. ;D

By the way, can those be had with different labels? Or would you have to "roll your own" so to speak?

Paul
 
OP
OP
ilovemaui

ilovemaui

Bronco Guru
Joined
Jul 10, 2010
Messages
1,651
Loc.
Pacific Moist West
I've been thinking about this statement u10072, and I just can't figure it.
Those are sweet fuse panels for sure. I think there are others here using them as well, unless that was you that posted them up the last couple of times too.
But heck, even a basic garden-variety $15 6-fuse ATO panel without a cover is an upgrade over a stock Bronco box!

In fact, I can't think of much that isn't better than a 40 year old rusty and falling apart Bronco box.
Except maybe another broken down old Ford panel that is. ;D

By the way, can those be had with different labels? Or would you have to "roll your own" so to speak?

Paul

If it's good enough to go in the harness kit, it's good enough for me.
 

Airmapper

Foolproofness Tester
Joined
Mar 15, 2006
Messages
1,710
Loc.
Bowling Green, KY
But heck, even a basic garden-variety $15 6-fuse ATO panel without a cover is an upgrade over a stock Bronco box!

Paul

I thought so, you may have even suggested it to me, but it's what I replaced mine in my '70 with.

I've yet to get on the road with this setup, but the pic is of 2 ATO 6 place Centech fuse panels. One replaces the stock panel, and the second will be for interior accessories. They are mounted on to a piece of UHMW plastic, which has a magnet bolted onto it and will stick to a plate that covers the old speaker grate on the back side of the dashboard. How well it will stick over bumps I don't know yet, it's a very stout magnet though and is hard to pull off any flat metal surface once it's on there.

IMG_1192%252520-%252520Copy_800_600.JPG
 

drajj5

Full Member
Joined
Sep 5, 2006
Messages
167
Loc.
Ellijay, GA
I thought so, you may have even suggested it to me, but it's what I replaced mine in my '70 with.

I've yet to get on the road with this setup, but the pic is of 2 ATO 6 place Centech fuse panels.
IMG_1192%252520-%252520Copy_800_600.JPG

If you don't mind...... Whitch distributor did you purchase yours from?%)
 

u10072

Bronco Guru
Joined
May 18, 2007
Messages
2,249
I am sorry but after seeing the centech stuff numerous times and seeing the other fuse panels out there on the market-- the ones in the CT kit is just a cheapo replacement. Personally for me if I were a guy on a budget but wanting to build a very nice truck-- I would simply remove the factory wiring, de-tape it, clean it, solder/heat shrink all the butt connectors/wire nuts/twist together electrical tape connections- replace the factory switches if they are bad, zip tie together and put in a loom --I would bet about 95% of the harnesses out there would be perfect after this treatment. Sorry not trying to knock anyones stuff but to me I have seen some horrible wiring splice jobs and typically its all pretty easy fix it just looks really worse than it is. I will say this -- replace the fuse block and add a relay block and you will 1. save money 2. understand your harness better (which is a great thing) 3. be able to use the factory switches without having to screw with all the universal stuff.

If your harness is not even there then a kit harness is fine but I still would rather use a myriad of others than the CT.

Like I said before I just dont feel the CT kit is an upgrade but a PITA -- I practice what I preach and I assure anyone going through the harness isn't hard-- I did it almost before I learned how to do anything and was very managable.
 
Top