• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Gas cap stuck

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
So nothing turned up in a search, but I'm hoping someone as figured out how to solve this. My original gas cap was missing the gasket, so it fit way to loose and I was afraid of it falling off on the road. I purchased a new one and it fit and worked fine. I've only removed it a couple of times and the other day when trying to remove it, it just kept spinning. :eek: Somehow, the inside part of the cap has it locked on to the fill tube, but the rivet or however it's held to the cap is loose. I'm at a loss as to how I'm going to get this cap off now! ?:?

Oh, '66 half cab with original fill tube and tank if it matters.

Chris
 

Rightpace

Jr. Member
Joined
Aug 26, 2019
Messages
114
Measure 7/8" from cap edge towards center and drill a 1/8" hole. Turn bit around and stick into hole, turn cap off.
 
OP
OP
chris-nc

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
Measure 7/8" from cap edge towards center and drill a 1/8" hole. Turn bit around and stick into hole, turn cap off.

Brilliant! Thanks for that suggestion. I completely get the concept of 'locking' the inside mechanism via the hole, to keep it from spinning. I'll give it a try this weekend.
 

Rightpace

Jr. Member
Joined
Aug 26, 2019
Messages
114
I don't know what the inside is spot welded to, so be carefully slow while drilling so you don't push the inside lock off. Mine appears to be a center venting mechanism with a rubber washer and a brass washer between the cap. So there is at least three pieces to drill through.
 
OP
OP
chris-nc

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
Right, thanks. I do have the old cap and know it was pretty much the identical, so I should be able to figure something out using that as a model. The concept you provided is what is most helpful!

I think it will work if I can just keep it from spinning freely when I turn the cap. I don't want to really go too far and take a chance of dropping metal in the tank either. I'll think about it a bit more and look at the old cap.

Thanks
 

Speedrdr

Contributor
Legend in my own mind
Joined
Nov 27, 2017
Messages
2,028
Loc.
Paris, MS
If you drill a 3/16 hole just get a 1/4 self tapping bolt and screw in through all the pieces which should lock it ALL together and allow the cap to turn off and remove.
Randy
 

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
Make sure things don’t get to hot you have gas fumes right there
 
OP
OP
chris-nc

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
Make sure things don’t get to hot you have gas fumes right there

That was my primary concern. I think a tiny bit, going a little bit at a time, should be ok. Definitely not ideal...

The self-tapping screw is a good idea as well.
 

EPB72

Contributor
Bronco Guru
Joined
Jul 13, 2019
Messages
1,216
Loc.
Pleasant Hill, CA
channel lock tongue and groove plies usually work a little squeeze on the outer edge and twist to loosen...
 

Jfryjfry

Sr. Member
Joined
Aug 28, 2017
Messages
503
You can use a 1/2” long self-drilling screw and do it in one step. Just make sure it isn’t too long and hits something you don’t want it to.
 
OP
OP
chris-nc

chris-nc

Bronco Apprentice
Joined
Sep 1, 2020
Messages
52
So I got really lucky and after trying several times throughout the weekend, I was finally able to fiddle with it enough to get it to come off without having to drill it.

I might just go buy a lottery ticket now!

This particular cap was from Dennis Carpenter (not far from me here in NC). If you purchase one, I highly recommend checking it well prior to installing it. The inside lock spins pretty freely now.

Thanks again everyone for the responses and creative solution ideas.

Chris
 

Attachments

  • IMG_9436.jpeg
    IMG_9436.jpeg
    102.1 KB · Views: 43
  • IMG_9437.jpeg
    IMG_9437.jpeg
    93.5 KB · Views: 43
Top