• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Gasket between D20 and adapter

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
IS this prone to leak? I have a gasket and was wondering about silicone sealer. Seems it would be better to just use the gasket with a dot of silicone to hold in place rather than gooping it up and risk it getting into the trans. Will the gasket alone be good enough?
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
It's not really prone to leak but it can. Make sure both surfaces are clean and flat. I use a little dressing on the gasket. Make sure to use sealer on the bolt threads. If it's an auto trans the gasket goes between the tcase and the bearing retainer.
 
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Thanks guys. It's a C4, wouldn't be too concerned if it was manual.
 
Top