• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Getting ready to pull tub - Q

turbotim2

Contributor
____________
Joined
Jun 26, 2003
Messages
2,158
I am getting ready to frame up the tub and wanted to know a good balance point front to back. For instance, x inches back from the windshield rail or x inches up from the rear of the bed rail. Thanks!
 

rcmbronc

Contributor
Bronco Guru
Joined
Dec 15, 2003
Messages
2,778
Loc.
Tomah WI
I hooked from the front set mount and the rear back seat mount and it balances fairly well.
 
OP
OP
T

turbotim2

Contributor
____________
Joined
Jun 26, 2003
Messages
2,158
I hooked from the front set mount and the rear back seat mount and it balances fairly well.

OK. I have no rear seat. But the center point between the two points you mentioned would probably be a good place to start!
 
Top