• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Going backwards

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
Okay, I know the trend is usually up and up...I started at 32 (tires), when to 33, and then to 35, but I'm thinking of going back to 33s. Experiences? Suggestions?

If I did, I would probably ditch my body lift (2). It is without a doubt nicer to work on stuff underneath, but I do like the 3.5 susp./33 tire look.

Help me decide. New rubber might be in the near future as is rear shock mounting, if I win the lottery--gears/lockers, so I'd like to get some input.
 

Blue71

Contributor
Bronco Guru
Joined
Aug 27, 2001
Messages
5,151
Nothing wrong with going back down. I Personnaly like the look of 3.5+ 2" Body + 33"'s I have been running them for a year now and like it. I am however planning on running 35's once I regear, but still like the 33's with the setup. I also like the 2" body for working on the underneath and would hate to give that up. Its all up to you though.

Good Luck,

Blue71
 
OP
OP
72_EB

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
Yeah, it's the neverending Bronco saga. I think I am forgetting what a pain it was to do stuff without the body lift. Don't know...if really regeared the possibilities are much greater. 4.11 now with 35 is a really decent daily driver combo around here where I need at least 70 on the highways.
 
Top