• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Going to the bone yard! Power Steering advice?

jeff68

Sr. Member
Joined
Oct 27, 2001
Messages
569
Loc.
Hattiesburg, MS.
Hey All,
I'll hope to be headed for the Bone yard to do some shopping around in the morning, looking for some seats maybe and a power steering setup, anyone have any recommendations for the year model trucks that will make a good donor for power steering setup?
I have manual steering now and would like to have something that would be a dirrect bolt-in!
Thanks in advance!
Jeff
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
most ps swap will require a u-joint in the steering shaft. The 78-79 bronco box is a good swap but requires a little work to the box. I got nice seats out of a 91 eclipse that I bolted right in.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
There is no direct bolt on junk yark swap except a stock bronco box even then you will have to modify your steering shaft. The mid 70's 2 wheel drive ford pick up box. May be the cheapest. The 4wheel drive F150 box is close drill new holes and you have to swap the worm gear and piston with a 2wheel drive box worm and piston. scout boxes are real close drill one hole swap internals and it looks stock
 
OP
OP
J

jeff68

Sr. Member
Joined
Oct 27, 2001
Messages
569
Loc.
Hattiesburg, MS.
6677ebman said:
I have an extra PS box off of a '77, might sell, let me know if interested.
Hey Mr. Scott
Drop me a PM/Email, I might just take that off your hands!
Give me a price, condition, and possible shipping cost if you can ship it!
I've got to get back to work on this thing!
Thanks, Jeff
 
Top