• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Good Cam Choice EFI 302?

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
http://www.summitracing.com/parts/LUN-61000LK/

What do you guys think of this cam for a daily driver/weekend wheeler? Summit catalog says it is an idle to 5000 cam, online says it is 1000-5000, but that still think that sounds good. What do you guys think?
This is going in a '90 5.0 that would replace the stock Mustang cam. Not looking for anything lumpy. Just reliability and little offroad off idle grunt.
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
CompCams will make a cam for YOUR setup usually under $200 delivered. You can tell them exactly what you want it to do and they'll make it.

Use the online form on their website it's easy. You'll get a response within a day or 2.
 

75koda

Jr. Member
Joined
Jul 16, 2009
Messages
63
Let me start of by saying I am by far not a engine guy but just went through this same question. Cam specs will really depend on what kind of performance you want and the way engine is set up. IMPORtANT part is to make sure you get proper cam for your computer. If you are running 5.0 HO then you will need cam with prefix of 35 in the PN for 351 firing order. Standard 5.0 uses 302 firing order. From my understanding it would still run but you may have some idle or other issues. You might have already known this just figured I would let you know, I did not and had to change cams twice once my fault the second summits. Hope this helps.
 
Top