• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Got some slots- what lug nuts?

hmh800

Sr. Member
Joined
Nov 5, 2009
Messages
365
Hey guys scored some 7" slots a while back. I know I need some sort of acorn lug nut, do I need a washer too? The wheel studs barely extend past the face of the wheel- I'm wondering if I need to change to longer studs (they're stock right now 95% sure).
Now's the time to change them before I put the hubs/axles back on!
 

Crazyone

New Member
Joined
Sep 1, 2010
Messages
15
Loc.
Aurora
Lug Nuts

The set of slots that I have are the same way. The Lug nuts have a shoulder on them that goes into the lug holes in the slots and yes they have washers. Slot lugs are not tapered but are located by the shoulder that goes in the holes.
 

DonsBolt

Bronco Guru
Joined
May 5, 2005
Messages
5,249
Loc.
Chestnut Hill, Mass
most slots use these
 

Attachments

  • lugnut.JPG
    lugnut.JPG
    71.2 KB · Views: 66
Top