Heat Soak-Cured!!

[stingus]

Thanks to everybody for all the help with my heat soak issue. I put an Edlebrock 1/4 inch Heat Insulator Gasket b/w my Carb and manifold and no more issues!!!

Even after long drives in the TN heat it starts right back up with no stalling or pumping the gas pedal!

 

[blubuckaroo]

Good job!
My spacer is still in the package along with the body lift parts. I'll have to do the body lift first for the spacer to fit..

 

[stingus]

Good job!
My spacer is still in the package along with the body lift parts. I'll have to do the body lift first for the spacer to fit..

I tried the 1/2 inch spacer first but it barely fit so I went with the 1/4 inch gasket and it had plenty of room. I just wasn't comfortable with the air breather almost touching the hood.