• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Heater/defrost control knobs

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Cole-Hersee used to make some decent plastic knobs that were more modern looking with graphics of each function on them. Just black though, without the chrome of the stockers.
Only problem I see is on at least one of the heater controls, the knob is molded onto the cable. That sound right?
Most of the stock ones come off with a set-screw, so they're fine to swap, but I seem to remember one or two that would have been a pain.

Hope that helps. Good luck.

paul
 
OP
OP
J

joshm28

Full Member
Joined
Dec 30, 2008
Messages
206
Loc.
Jasper, AL
I'm not looking for knobs. I was looking for the entire linkage and knobs. Something different, possibly something used in a 40s or 50s restomod
 
Top