Help needed with turn signal switch

[kaw550]

I just put in a new turn signal switch and removed the old aftermarket turn signal.

There is no power at the connector. I checked the fuse panel and all the fuses are good.

Is there any kind of breaker or relay that could be bad? It doesn't look like the wires have been cut.


Now I know why they put it the aftermarket switch.

 

[Viperwolf1]

Make sure you have 12V on both sides of fuse #2 then check the turn signal flasher.

 

[kaw550]

I did turn out to be a bad flasher.

I also found that the vehicle side of the steering wheel harness did not match any of the wiring diagrams I found.