• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Turn Signal / Blinker help needed

Whistler

Jr. Member
Joined
Apr 7, 2006
Messages
107
Loc.
Johns Creek, Georgia
My blinker works left but won't work right:
- light stays on at instrument panel when lights are activated
- No clicking when activated right

Is this an easy fix? Can anyone point me to a do-it-yourself thread on this?

Thanks in advance
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Try getting a new blinker relay usually a small silver cylinder in the wiring near the steering column. You can swap the turn signal and hazard relays to see if the relay is the problem. Also check your grounds bad brounds can cause problems to.
 

Smokeater11

Bronco Guru
Joined
Jun 14, 2006
Messages
1,971
Loc.
Auburndale,FL
Aw that's an easy fix... you need a quart of blinker fluid in the right blinker!;D
Sorry, I tried to talk my fingers out of typing that, but they would listen.....;)
 

SeaBiscuit68

Bronco Guru
Joined
May 26, 2003
Messages
1,404
Loc.
Tacoma Wa
Most likely either the front or rear turn signal bulb needs replacing. While you're at it make sure the sockets are clean and grounds are good.
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
SeaBiscuit68 said:
Most likely either the front or rear turn signal bulb needs replacing. While you're at it make sure the sockets are clean and grounds are good.


I agree. I would check the bulbs first.
 
Top