• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

HELP!! Pilot Bearing Retainer Clip?????

Big D

Full Member
Joined
Sep 13, 2005
Messages
222
I am in the process of installing a 4.56 gear set into my 9" right now as we speak. I was punching out the old pilot bearing (not sure if that is the correct name, my manual calls it this) from the third member, when the pilot bearing retainer popped off. I didn't even notice it sitting there. Now, I'm not sure which direction the teeth on the retainer should sit. I'm thinking the teeth should set down against the bearing race, not the front of the pinion. If anyone could help out and clue me in real quick. I thank you guys yet again.

Big D
 

broncow72

Village Idiot
Joined
Jun 5, 2005
Messages
2,174
Loc.
Spring,TX.
I think you're dead on. I know exactly which part you are refering to, even looked on a diagram but it didn't show actual direction.
Sorry I'm not giving a definate anything.
 

broncow72

Village Idiot
Joined
Jun 5, 2005
Messages
2,174
Loc.
Spring,TX.
I just called my buddy and confirmed I am totally wrong (of course). Fingers out, makes total sense, other way will back out too easily.
 
OP
OP
B

Big D

Full Member
Joined
Sep 13, 2005
Messages
222
Broncow,
Thanks for the help. Makes sense to me. It's amazing how sometimes I can sit there and think and think about something. Then, someone chimes in and it seems to click.

Big D
 
Top