• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

HIGH pinion d44

fordtrucksrule

Sr. Member
Joined
Feb 11, 2008
Messages
838
Well it is almost done!!! I setup the 4.09:1 gears with a new detroit. Slid the axles in place and got the knuckles in place with the spindles and brake rotors now i need to route the hard brake lines. But while the axle is out i am going to reseal the oil pan. and change the proportioning valve. do you guys think i should move further away from the headers?
 
Top