• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hinge Post Fix by WH

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
My frame off by a professional restoration shop ran into a snag replacing the left or driver's side A pillar/hinge post. WH and Tom's are out of the one piece pillars. The manufacturer made a run that turned out to be defective. The one I got moves the door to the rear about 1/4", leaving a huge gap between the front fender and the door. The gap at the latch post went to nothing. I bought a 2 piece hinge post from Wild Horses that worked. To the best of my knowledge this is the only current way to get a correct new replacement for the left or driver's side hinge post.
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
I am pretty sure I used one of those on my Bronco. I couldn't figure out why my gaps were off. I should have looked at it closer before I moved on. I had to get creative with my hinges, milled the faces and put a bend in them to make it work. I am glad you posted this, it makes me feel better about what I went through. I knew something was off, just wasn't sure what the deal was.
Thanks for posting!
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
It is the same defect. The shop discussed milling the back of the hinges and I said no. How would I replace those hinges? It's just too deep in the body/tub to leave a bad part in. There's no realistic way to fix it later. Again I thank WH for coming up with a good fix. I/we were kind of stuck, and had no good answers.
 

Jamie Chriss

Sr. Member
Joined
Feb 28, 2015
Messages
577
I had the same problem, the way the metal is pressed in some cases tilts the hinge in. the bummer for me is I had to have my painter, body man cut the hinge plates out and reweld to correct the defect$$$ Money I should not have had to spend!
 

langester

MASTER OF MADNESS
Joined
Mar 2, 2013
Messages
2,681
Me being new to replacing the door posts was part of the problem. I did not have the window frames in my doors, no windshield frame in place and no fenders to mount to check everything. I checked the door fitment to the rear quarter and thought I was good. Months later I installed the other parts and figured out I had a problem. Modifying the hinges worked out good but I wish I had done my homework before I tackled the door posts. Live and learn I guess, luckily mine is going to be a driver and not a show truck!
 
OP
OP
J

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
This restoration will cost upwards of 50 grand plus what I think is a fairly clean '77 and all the VIN ID parts and title of an even cleaner '68. IE I own both. Being all in, the finished product has to be right. As a restoration it will be a show truck. Any modifications will be period correct. It will look original while working a lot better.
 
Top