• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hitch...home made or no longer mfg?

mattt

Bronco Guru
Joined
Sep 23, 2006
Messages
3,814
This receiver hitch was on my 69 Bronco when I brought it home. I've always wondered who made this hitch or if it was a home brew. I had to take it off when I went to a BC fuel tank as it goes under the stock tank. Anyone from the old days recognize it?
 

Attachments

  • hitch.JPG
    hitch.JPG
    62.4 KB · Views: 221

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I'd say more home made than anything. Most old school hitches sold by the venders were not the reciever type. Of course anythings is possible I just dont recall any like that.
 
OP
OP
M

mattt

Bronco Guru
Joined
Sep 23, 2006
Messages
3,814
If it was home made, whoever made it was familiar with how hitches are commonly made. It looks a step above typical home fab & has integral safety chain hook spots built into the hitch.

I had a thought after posting this thread. Did Hickey, Clover Mfg ever offer a Bronco specific hitch? Reason I ask is my Bronco was heavily Hickey'd by the previous owner in the 70's. I have some Hickey Bronco products still in the Hickey box that were never installed....even after I've owned it for almost 13 years.
 

mofoco1

Bronco Guru
Joined
Aug 25, 2001
Messages
1,474
Loc.
Clovis, CA
Matt my first EB a 75 had one like that, was bent under the gas tank and mounted to the rear support.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Home
Actually probably done by a welding shop. Looks very much like many welding shop created hitches from the 70's and early 80's on all kinds of thing. That giant "I" shape is a welding shop classic. Great no engineering design for handling weight distributing hitches without having to make the crossmember take an engineered torsional load.
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,608
Loc.
Earth
I've got one just like it. Made by EZ-Lift.

It's for sale if anyone is interested!
 

Stroppe-Envy-77

Bronco Guru
Joined
Jun 15, 2009
Messages
1,011
Back in the day, you could go to a "trailer hitch shop" (yes, that was all they did) and they essentially built a hitch for your vehicle using a combination of off-the-shelf and custom-fabricated pieces.

The one pictured seems as though it could have been one of those.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I have a couple receiver hitches sitting out back that I took off EBs that were obviously either production items or fabricated by a shop that made hitches.... Neither of them look like the one in the OPs pic though, not that that means anything.
 
Top