• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

hmm? where that come from? how that get loose?

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
Went riding yesterday let off the petal get a whine? Hmm check the hubs after several checks of fluild pull the plug on the tcase....least a extra quart comes out WTH? anyway plug it back up. NO it dont have no x mission fliud in it!!! but was way over full.

Find the culprit rear pion nut was loose seems the lock indents are not geeting onto the pinion shaft threads bottoms out just shy of them...any fixes? This is a flanged type lock nut no crush washer
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,341
Water in tcase will push the oil level up. You need a thinner lock nut.
 
OP
OP
NYLES

NYLES

Bronco Guru
Joined
Aug 13, 2004
Messages
9,846
no water, was jus damn sure overfull, amazingly I didnt have no drips today!!!!! anywhere.......life is good!
 
Top