• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

How much steering "play" is normal?

73 Bronco NC

New Member
Joined
Aug 22, 2007
Messages
14
Loc.
Chapel Hill
I am working on restoring a 73 Bronco Sport. It has been a blast. An expensive blast, but still a blast!

My goal is to return it to as original condition as possible.

I am a rookie, so please bear with me. I have a couple questions.

1) How much play is acceptable in the steering? I have tightened all the front end joints and re-greased them. That helped a lot. But there still is a significant amount of play. Not real dangerous or anything, but still a concern. Is there an adjustment I can make to the power steering box that might make it any better? Any other suggestions? Or is this "play" just the nature of the beast?

2) My Bronco came with a "dealer installed" spot light on the roof. Was this common? Does this make the Bronco any more or less "authentic". I think it is really cool, but again if I am trying to restore it to true original condition, would you keep it, or remove it?

3) Are all Broncos real rattle machines in the back? I checked under the back end and everything is secure (muffler, gas tank, etc). It sounds like maybe it is the tail gate or rear window or maybe the tire holder?

4) I am desperately trying to find an original jack, jack crank and lug wrench for my Bronco. If anyone has one they don't need, please let me know.

Thanks for any advice!
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
1) How much play are we talking? The best I've gotten out of mine is about 30deg of slop at the steering wheel.

2) Thats cool! not sure how effects the value though.

3) Tail gate and lift gate are usually culprits. There is always this option.
http://broncograveyard.com/bronco/i-14555_the_silencer_tailgate_hinges__pair.htm
How do all the bumpers look? Do yo have the little tab that attcahes to the tailgate and fits in the little slot on the liftgate? Mine rattles there so I put a small piece of black heater hose over it. Not great for a restore but maybe you can coat it in rubber or something.

4) Good luck on the hunt.
 

knack

Contributor
Sr. Member
Joined
Feb 2, 2007
Messages
877
My '73 must have a good 30 degrees of slop in the wheel. I can't remember if the one I owned back in the 70's was any better when nearly new. I think all the freedom in the wheel was to make for safer driving if you have Tourette's syndrome, or a nervous tic of some kind.
The truck knows better than to go exactly where you point it - it's sort of a process of negotiation.
 

2b1ask1

Sr. Member
Joined
Sep 8, 2006
Messages
614
Loc.
oklahoma
My 73 had a ton of slop, till West Texas Offroad had their way with my steering gear.. Now its great.....
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
The steering should be as tight as a new car but its really about how much you can live with. My 73 also had a lot of wear in the steering box once I got the box rebuilt it was like a new vehicle. Dont try adjusting the sector shaft in the box you'll only create more problems and possible ruin a box send it out and get it rebuilt.
The tail gate and lift gate are the usual noise makers. With new weather strip and careful adjustment you can just about get rid of all noise back there. You can also get some of the venders products that also help eleminate the noise I heat they really work. I havent tried them yet as I have made mine pretty quite through adjustment.
 

johnmlebel

Bronco Guru
Joined
Jun 17, 2007
Messages
1,369
I have about 2 inch of play but my steering gear is original 69 and has not been rebuilt yet.
 
Top