Hub Caps

[pbets756]

I am restoring my 76 Bronco and had been looking for hubcaps like ICON uses on a lot of his builds. I really liked that look with the half moon caps and Wimbledon white rims. I spoke with Jonathon from ICON a long time ago and asked him if I could buy caps like that from him or where he purchased them. He wouldn't give me any info on them at all, although he seemed like a decent guy. The other day someone posted a pic of there beautiful Bronco build and it had the same hubcaps as the ICONS. I asked about them and was told of several places to get them. You just have to cut the centers out for the front hubs. I got them yesterday from Summit and they are actually 49 50 ford caps. They are stainless steel. Today I cut the centers out on my lathe and will eventually polish them on the buffer although they have a good shine on them already. If anyone else is interested I have the part numbers and will describe my method of cutting out the centers. Thanks Paul

 

[Got4wd]

Those are the ones I’m looking for also. i would like the part numbers please. I did find them at Scotty’s and it wasn’t a bad price. What size hole did you go with?

 

[pbets756]

These are from Summit and their part number for the front caps without the ford stamped on them is UPD-A6030P and the rears with the Ford stamped is UPD-A6030D. I bored the holes out to 3.60" which gives a 1/8 reveal with the locking hubs. They are the same hubcap except for the FORD stamped for the rears. Very good quality and 100% stainless steel. The cost with shipping for all 4 was $250.00 which I gladly paid since that is the look I wanted. Unlike chrome, these won't rust and if they lose their shine I will just buff them out with some stainless compound on the buffer. Are you going to use a lathe to cut the holes? That is what I did and it looks factory. You won't get as quality of cut using a hole saw. Need anything else let me know.