• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Humvee Wheels

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
Hi,

What are peoples thoughts on the Humvee bead locks? I know the are 8 lug and I think there are the right pattern for the D60s. What about the bead lock them selves?

There is a guy near by that has a set or 4 for sale for not to much $$. they are the 8 bolt bead lock. I'm thinking the 12 may be better and the 24 better than that?

Anyone running any?

Thanks
 

Toddpole

Sr. Member
Joined
Jan 2, 2008
Messages
832
I run recentered H1s on my Bronco. They can get heavy when you start adding rock rings and other protection but they will hold a tire on the rim regardless of air or lack thereof. I fought beads popping of my rims for several years before I put these on. I wouldn't go back to a std wheel off road.
 
OP
OP
broncokak

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
If all goes as planned these would get a set of 37s that would only be run for off road but would need to be able to be driven to the trails, sometime hundreds (even thousands) of miles away. %)

Weight is a concern, I'm to use to my aluminum rims I guess.
 

mp

Bronco Guru
Joined
Dec 22, 2001
Messages
2,921
Loc.
Austin, TX
In stock form, they have stupid backspacing--somewhere around 7"? If you center to 5x5.5 you can fix that to the 3.5" range.

I ran them and loved them, especially if your truck is in the 37" tire realm, with the availability of HUMVV take offs.
 
OP
OP
broncokak

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
In stock form, they have stupid backspacing--somewhere around 7"? If you center to 5x5.5 you can fix that to the 3.5" range.

I ran them and loved them, especially if your truck is in the 37" tire realm, with the availability of HUMVV take offs.

I would most likely keep the 8 lug patter, if they fit the D60 8X5.6 lug. I could go 5X5.5 I suppose but that would cost more for the 5 lug hubs.
 

mavereq

Bronco Guru
Joined
Feb 19, 2009
Messages
2,092
You can recenter them with any lug pattern you want. Trailworthyfab sells the centers and pvc inserts. You need to run pvc inserts for the beadlocks to work without the run flats.

Personally, I'd run 1.5 or 2" spacers instead of recentering if you're going 8 lug.
 

TAWL_BOY

Sponsor/Vendor
Full Member
Joined
May 26, 2013
Messages
336
Loc.
Friendswood, TX
The 8 bolts were for bias ply tires. They are rated for less PSI.

The 12 were for radials, and the 24 came out for the tire pressure required for the up-armored HMMWVs.

If you want to run them with factory backspacing on a dana 60, you can swap to DRW front hubs, and sell your SRW hubs for a profit.

You'll notice a lot of the rock bouncers are running H1s for their strength.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I've played with them, they really need to be re centered to work correctly or run a 2" - 2-1/2" wheel spacer, they are the correct bolt pattern. in your application using the dual wheel hub makes it too wide, but is an option since you do have the hubs sitting around. In your application the 8 bolt are just fine, with 37's you'll never need to be over 26-28psi and your not anywhere near the GVW of the design. As said they are HEAVY and at a minimum need a round bar ring welded to the lip of both beads, the bead lips bend pretty easy without it. Its worth getting PVC rings for the bead lock from TWF they are lighter and easier to deal with than the rubber or magnesium runflats that they come with. My biggest complaint is the 16.5 part, sure tires are available cheap enough surplus but IMO they do not work that well and while your traveling availability can be an issue, most of the major tire manufacturers are discontinuing most of the 16.5 tire offerings. IMO there are just better options out there and at the end of the day by the time its all done the cost difference in negligible.
 

mavereq

Bronco Guru
Joined
Feb 19, 2009
Messages
2,092
I switching to 17's only because of tire availability. Interco and pitbull seem to be the only ones keeping 16.5 alive
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
My friend runs them on his full size 78/9 Bronco with 43" TSL SX's and they do everything he asks of them. The tires and wheels cost him twice what the rig did originally, but they're pretty sweet. While I don't love the lack of tire options for the 16.5's, if you intend to flog them off-road, then Interco and Pitbull both make good tires for that type of use.
 
OP
OP
broncokak

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
I have noticed the lack of selection for the 16.5 rims. I could get a set of H1 tires with the rims I'm sure.
 

GatorDoc

Jr. Member
Joined
Jun 25, 2012
Messages
59
While I don't run them on my EB, I run Super Swamper 44's on my H1 with them and these wheels are just about indestructable.
IMG_6348_zpssormlnbk.jpg
[/URL][/IMG]
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
I have noticed the lack of selection for the 16.5 rims. I could get a set of H1 tires with the rims I'm sure.

h1 tires suck, the biggest thing is you never really know how old they are so they may be dry rotted internally. Even the guys that are using remolded tires are having issues with tire failures after a year or 2 you never know how old the case is. And the military decommissioned them for a reason.....

The other is they tend to be hard so traction on rock is disappointing compared to what you are used to.
 
OP
OP
broncokak

broncokak

Bronco Guru
Joined
Jun 13, 2006
Messages
3,970
h1 tires suck, the biggest thing is you never really know how old they are so they may be dry rotted internally. Even the guys that are using remolded tires are having issues with tire failures after a year or 2 you never know how old the case is. And the military decommissioned them for a reason.....

The other is they tend to be hard so traction on rock is disappointing compared to what you are used to.

Hmmm, I kind of figured this. Thanks for confirming. :p
 
Top