• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hydroboost Questions-Mounting Bracket

rcmbronc

Contributor
Bronco Guru
Joined
Dec 15, 2003
Messages
2,778
Loc.
Tomah WI
Sorry to ask another hydroboost question, but I cant really find the answer. I want to install a Astro hydroboost that I have in my 76. It is a 351W with1" body lift. No factory power brakes. It ahs the Ford Motorsports valve covers which are quite tall. Do I need an angled bracket like the vacuum booster uses or just an Astro angled bracket?

If just an angled bracket, what is the max angle that it can be. This I would think would be pretty easy to make.
 

t.lay

Bronco Guru
Joined
Mar 17, 2005
Messages
1,261
Loc.
Grayslake, IL
I've seen some posts about the angled bracket. I've got a 302 so it fit with just a modified mounting plate. How much taller is the 351? I've got something like 3" of clearance between my valve covers and the bottom of the h-boost.
 
OP
OP
rcmbronc

rcmbronc

Contributor
Bronco Guru
Joined
Dec 15, 2003
Messages
2,778
Loc.
Tomah WI
I am not sure how much higher, but the motorsports valve covers I am sure are not helping.
 

JKrieg70

Sr. Member
Joined
Sep 17, 2004
Messages
401
Loc.
Columbus, GA
This is what my angle bracket looks like bolted up to the firewall.
 

Attachments

  • Angle Bracket Installed 1.jpg
    Angle Bracket Installed 1.jpg
    49.5 KB · Views: 187

crawln68

Bronco Guru
Joined
Oct 8, 2004
Messages
3,045
Here's mine for reference. This is with a 5.0.
 

Attachments

  • 100_0745.JPG
    100_0745.JPG
    95.1 KB · Views: 173
  • 100_0747.JPG
    100_0747.JPG
    81.6 KB · Views: 169

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
Crawlin68 How about some pic's of the linkage at the pedal and on the bracket.
 

mountain14er

Full Member
Joined
Jul 14, 2005
Messages
267
Loc.
Denver
Hey madgyver, thanks for the reminder on this. I've got the astro hydroboost and bracket sitting in the garage and was concerned about EFI clearance but I think I'll get around to installing it now.
 

crawln68

Bronco Guru
Joined
Oct 8, 2004
Messages
3,045
ransil said:
Crawlin68 How about some pic's of the linkage at the pedal and on the bracket.


Here you go. Hope these help.
 

Attachments

  • 100_1697.jpg
    100_1697.jpg
    83.4 KB · Views: 140
  • 100_1698.jpg
    100_1698.jpg
    44.9 KB · Views: 138
  • 100_1699.jpg
    100_1699.jpg
    53.4 KB · Views: 131

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
Crawlin68,

The Rod under the boot has it been modified to fit?
What is that make & model is the hydroboost?

I'm playing with an '84 Ford & '91 Astro trying to come up with the best fit.
 
OP
OP
rcmbronc

rcmbronc

Contributor
Bronco Guru
Joined
Dec 15, 2003
Messages
2,778
Loc.
Tomah WI
Crawln68, where did you get the angle bracket, or is it a stock Ford item?
 

crawln68

Bronco Guru
Joined
Oct 8, 2004
Messages
3,045
ransil said:
Crawlin68,

The Rod under the boot has it been modified to fit?
What is that make & model is the hydroboost?

I'm playing with an '84 Ford & '91 Astro trying to come up with the best fit.


Nope, I used the original rod that came on the hydroboost unit and the stock EB rod to the pedal. So I didn't have to change/modify anything with the rods, it was a bolt on and go (or stop) addition to the EB. The hydroboost unit came out of an 84 Lincoln Continental.

Rmcbronc-The angle bracket is from JD. It made the addition of hydroboost a very easy install.
 

72Sport

Bronco Guru
Joined
Jul 8, 2002
Messages
2,954
I bought a JD bracket early this year and it is different than the one crawlin68 shows in his pictures. I also bought one of the ones off of ebay for $90 and sent it back.

The new JD bracket doesn't angle down where the master cylinder mounts like the stock bracket. I think it is made for the no fender clearancing booster. It is not dimpled where the 1/2" bolt goes through the bracket. The hole for the 1/2" pivot bolt are just drilled at an angle through the bracket. Which means the ends of the pivot shaft doesn't have much contact with the bracket.

The best bracket if you can find one is stock 76 77 in my humble opinion. I have seen three different designs of the JD bracket. He has been busy.
 

RFR2212

Full Member
Joined
Nov 26, 2005
Messages
158
Loc.
Chicago Burbs
On my bronco, we had to notch the back of the valve cover. No idea why I had bad luck, but it works well after we got the valve cover issue taken care of.
 

Gummi Bear

Bronco Guru
Joined
Jul 8, 2003
Messages
3,647
68 - you mentioned that your brake booster bolted right up to the bracket. Is that a stock bracket, or an aftermarket one? I saw that you mentioned that you got it from Duff's, but I'm wondering if it is stock dimensions.
 

72Sport

Bronco Guru
Joined
Jul 8, 2002
Messages
2,954
If you were to buy a Duff bracket today I don't think you would get a bracket that pointed the master cyl/booster down toward the inner fender. I bought one earlier this year and it was almost flat. JD has been changing things. I have a JD like 68, stock and 2006 JD model and all of them are different.

Look up posts by Desertthrasher. He posted about problems he was having mounting his hydroboost and his JD bracket. He provided pictures about hood clearance problems (same problem I had).

Note the position of the hydroboost. The boot barely clears the bottom of the bracket.
 

Attachments

  • CB111_1160 (2).JPG
    CB111_1160 (2).JPG
    243.3 KB · Views: 114
Last edited:

crawln68

Bronco Guru
Joined
Oct 8, 2004
Messages
3,045
Gummi Bear said:
68 - you mentioned that your brake booster bolted right up to the bracket. Is that a stock bracket, or an aftermarket one? I saw that you mentioned that you got it from Duff's, but I'm wondering if it is stock dimensions.


I had to modify the JD bracket where the hydro unit bolts to the bracket. What I was referring to that “bolted right up” was the rod that comes out of the hydro unit was a direct bolt up to the JD bracket. In other words, I didn't have to change/modify the rod that comes out of the hydro unit. It was the perfect length.

Here is a picture that shows the tab that I had to add and the extra holes that I drilled in the JD bracket in order for the hydro unit to bolt up. (red arrows)
 

Attachments

  • 100_0700.JPG
    100_0700.JPG
    61.7 KB · Views: 106
Top