Ideas to clean up the wires going to my battery

[JohnJohn]

My trail rig is starting too look worse than I like when it comes to wiring. I have several wires going to my positive battery post and on the power side of the starter solenoid now that look trashy and I am asking for problems.
How have some of you solved this?

I was thinking about adding a water proof marine fuse panel on the wheel well or inner fender or even a positive stud just to get things off the battery.

 

[bronconut73]

I did a brass connectors marine fuse block.

Works great and tidys things up a bit.

 

[toddz69]

Years ago I added an additional terminal stud on my inner fender to give my positive battery terminal (which I like to keep 'clean') and my solenoid a little relief. I made a short piece of cable (battery cable gauge) to run from the battery to it.

It looks very similar to this:

http://www.bing.com/images/search?q...67f68005b22e9309a25b9994afe23a52o0&ajaxhist=0

Todd Z.

 

[Jdgephar]

I like to add the fuse block, something like this. That way, you get fuses on all of the accessories you add to protect your wiring. Inline fuses work too, but this cleans it all up nicely.

http://www.overtons.com/modperl/product/details.cgi?pdesc=Blue-Sea-Common-Sourced-ST-Blade-Fuse-Block-12-Circuits-w/Cover&i=85177&r=view&from=grid

 

[markw]

Pictures if you have them, Thanks!