• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ididit Direct Fit column measurement needed

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Can someone measure the distance on an Ididit Direct-Fit tilt column from the centerline of the mounting hole slots on the under dash bracket to the end of the column? (the housing, not the end of the splined shaft).

Thanks,
Todd Z.
 

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
13 1/8 to top of column. 15 3/8 to base of steering wheel adapter. This is on the column what WH sells in their kit with collapsable shaft, wheel etc

Hank
 
Top