In Process Of Installing Mechanical Airtex/Master Fuel Pump Right Now. Need Help.

[BuckBronco76]

I'm In the process of installing this pump (on a 302) and I'm looking at the directions and step #5 states this:

[#5 Add Grease to the rocker arm pad and rocker arm cavity to lubricate the internal parts.]

Where is the rocker arm pad and rocker arm cavity located? Is it that arm on the pump? I don't want to screw this up and what grease should I buy?

Your help would be appreciated. Trying to get this thing on before it rains.

 

[broncnaz]

basically just need a little lube on the last inch or two of the rocker arm yes its the pump arm. I've actually never lubed one up before installing but it is a good idea. I'd probably just use a little engine oil. As its really not that big of a deal and the eccentric is already lubed.

 

[BuckBronco76]

basically just need a little lube on the last inch or two of the rocker arm yes its the pump arm. I've actually never lubed one up before installing but it is a good idea. I'd probably just use a little engine oil. As its really not that big of a deal and the eccentric is already lubed.

Thanks broncnaz. Headed outside to lube it up and install.