Inner door post brackets

[75MIKE]

Does anyone know of any of the vendors sell the hinge plate brackets separately?

Some that look better than these? Thanks

 

[Skinnyr1]

I pulled and replaced the outer panel to replace just like you did. Ended up custom making the hinge brackets out of simple angle iron.

Yours appear to be in decent shape though, to either fix and reuse or to make a template from to remake.

 

[WILDHORSES]

Hinge backing plate. Pretty simple to make but these could save some time.
https://www.wildhorses4x4.com/product/Door-Hinge-Backing-Plate-66-77/Bronco_Door_Parts_66-67

JIm

 

[75MIKE]

Thanks Guys, Looking for the brackets that the hinge backing plates slide into.

 

[langester]

I had the same issue on mine, I made my own and welded them in, basically a couple simple pieces of sheet metal bent up.

 

[75MIKE]

I had the same issue on mine, I made my own and welded them in, basically a couple simple pieces of sheet metal bent up.

Thank you fella's. yes, Looks like that is the way to go. Couldn't handle the thought of destroying $200 worth of door posts to get the brackets.