• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

insulating a soft top

evkennedy

Jr. Member
Joined
Feb 23, 2010
Messages
114
Loc.
Covington
Has anyone done this? I finally put my a/c in and dynamated the entire floor. Very happy with the cold from the a/c but when the truck is let out in the sun she gets hot. There has got to be a way to insulate the top.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
I have never done it, but I think I have seen it made for Jeeps.

As I recall, it is a quilted panel of Thinsulate material that can be snapped or Velcro'd into place.
 

phred

Contributor
Bronco Guru
Joined
Aug 25, 2006
Messages
3,608
Loc.
Earth
My wife's sl mercedes convert has a light colored fabric liner attached to the lower portion of the top frame. Not sure what is between it and the top, but it stays nice and cool.
 

ucbronco

Full Member
Joined
Nov 18, 2006
Messages
273
Loc.
Summerfield, FL
I know a guy here in fl that makes these for the jeeps and has inquired about using a Bronco for a pattern as well. I contact him and see if he is producing these yet.

Butch
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,345
Loc.
Tangent, OR
Wasn't Chuck at BC Broncos talking about making a headliner of sorts for his soft top?
 
OP
OP
E

evkennedy

Jr. Member
Joined
Feb 23, 2010
Messages
114
Loc.
Covington
Chucks is a headliner made for his top. Not sure if his is for insulation to just cover the frame. I have a bestop.
 
OP
OP
E

evkennedy

Jr. Member
Joined
Feb 23, 2010
Messages
114
Loc.
Covington
Broncitis,

That stuff may work but i am scared to buy. That may set me back alot. WOuld love to find someone that has done something.

ucbronco,

let me know if you here something.

thanks.
 

Broncobowsher

Total hack
Joined
Jun 4, 2002
Messages
37,076
If you find the company that makes the soft topts for ICON FJ40s, I have seen those built up as insulated.

Short answer, none off the shelf. If would be a custom piece.
 

Dan's73

Bronco Guru
Joined
Oct 17, 2006
Messages
1,117
But a custom piece with a fair amount of interest I'm sure....I know I'd be interested...
 

chuck

Bronco Guru
Joined
Aug 14, 2001
Messages
6,474
Loc.
Ingram, Texas
Chucks is a headliner made for his top. Not sure if his is for insulation to just cover the frame. I have a bestop.

Very timly, I have a prototype insulated headliner for my top. Have had for a while but finally gave up on the first bidder and is out for bid now. Hope to get pricing this week.
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,359
Loc.
Memphis, TN, USA, Earth, Milky Way
Have some simple pockets sewn onto the inside of the soft top, with velcro closures. Then buy a big roll of Aluminized bubble wrap and cut pieces to fit into the pockets. It would reduce noise, heat transfer, & flapping, but the top could still be dropped/folded/rolled with the insulation inside.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,210
Has anyone done this? I finally put my a/c in and dynamated the entire floor. Very happy with the cold from the a/c but when the truck is let out in the sun she gets hot. There has got to be a way to insulate the top.

Ralph Schorbach (who I don't believe is on classic), an active EB member in the SoCal area, has a nice insulated piece for the underside of the roof of his STC/Kayline top. If someone has contact info for him I'm sure he could tell you where he got it made.

Todd Z.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
Dude, you just lost man-card for posting this!


Whatever%)

Google Thinsulate (same stuff used in my manly work boots ;)) and that link comes up.

Actually, I go to JoAnn Fabrics sometimes to get stuff. I got some foam to redo the upper bunk in our Volvo semi Bronco hauler and some gray vinyl for one of the interior wall panels in the sleeper we had to modify. It that a manly enough project for you? ;D
 
Top