• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Is this posi?

Ds18425

New Member
Joined
Nov 20, 2017
Messages
16
Loc.
Boerne
Hello All! Can you help me identify this ford 9" rear end? is this posi Track? It only has two gears. The other ones I seen have four gears. It does have friction pads but I am not sure what I have.

Thanks in advance!
its off a 1974 bronco 302, AOD transmission
 

Attachments

  • bronco rear end.jpg
    bronco rear end.jpg
    113.5 KB · Views: 194

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
Yep, looks to be a stock 2 pinion. You can tell by the clutch pack. That is the 4 ear looking deal on the left. Pretty weak but better than an open.

Jim
 
Last edited:
OP
OP
D

Ds18425

New Member
Joined
Nov 20, 2017
Messages
16
Loc.
Boerne
thank you all for the quick response! The pinion gears have some chips in them. Can they be bought and replaced or am I better off just getting a new pumpkin or locker?

again, thank you!
 

sanndmann3

Contributor
Bronco Guru
Joined
Jun 13, 2007
Messages
1,832
Depending on what you want to do with your truck, a locker might be warranted...
 
OP
OP
D

Ds18425

New Member
Joined
Nov 20, 2017
Messages
16
Loc.
Boerne
just a weekend driver. Defiantly wont be doing hard core off road just the occasional 4 wheeling around the ranch.
 

broncodriver99

Bronco Guru
Joined
Jan 27, 2008
Messages
4,780
Loc.
Glen Allen, VA
There is a guy on ebay that sells all of the internal parts for the traklocs. I bought some stuff from him all good quality. Lemme see if I can find his info.
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
If you have a tight budget a rebuild would suffice. If you are looking to upgrade to 31 spline axles then a Dura Grip would be a good choice for your posi/limited slip. For a crawler some type of locker would be the way to go.

Jim
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Currie enterprises sells parts as well. Ive gotten parts from them in the past including a billet steel clutch cover kinda drives the price up but they don't blow out like the stock ones do. I'm not sure if they still sell them but they might its a good upgrade. Id check the shafts those gears ride on if worn replace them as well. Also good idea to get new thrust washers. I would also put in new friction plates and springs you'll be good as new then. Oh yeah make sure you get a bottle or two of friction modifier it will help control clutch chatter.
 
Top