• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

JD flex test

45acp

Full Member
Joined
Nov 11, 2003
Messages
488
Loc.
Texarkana AR
well, i finally got some decent pics today of what the JD longarm setup will do. never been able to get some nice ones before on the trail, as the pucker factor was too high at the time.;D its still not drooped all the way in the front, but fairly close.

broncoflex1.jpg

broncoflex2.jpg

broncoflex3.jpg
 

Dusty

Bronco Guru
Joined
Jun 28, 2001
Messages
2,965
That's some darn good flex! Did you crawl under there to look for bind to see what you're going to address next to get even more? Nice looking rig too by the way.

Dusty
 
OP
OP
45acp

45acp

Full Member
Joined
Nov 11, 2003
Messages
488
Loc.
Texarkana AR
yea, the track bar is binding. i will be making my own soon with stock bushing up top and rodend on bottom. its still not flexed all the way in the front, it appeared to have about 1-2" to go in droop.
 
Top