• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

jeep seats. Please help

Robster

New Member
Joined
Aug 4, 2015
Messages
36
Hey guys I have a 74 bronco and I am looking for some seats that I can do a custom upholstery on. I would buy new but can't find any unupholstered. anyway would seats from a jeep wrangler or Cherokee fit good and low enough? I can reuse the seat brackets from my Corbeau seatsI have now f that works better. Please let me know if you have any better seat options. I am 6'1" and need a low seat option. Thanks a million.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Well I've not used the Jeep seats.. But I have had 1986 Bronco II SEATS in my Bronco for about 7 years.
.. Now I'm in the process of adding the 2000 Dodge pickup seat that have the shoulder belts in the seat backs. .. Might check this out.
.. I'll be a while before I get back to this seat project. So Let me know how this works out if you use this. Thanks.
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
I have XJ seats in my bronco,had to modify the brackets to lower the seat some,I need to have the drivers seat foam replaced then going to have them reupholstered,but they are comfortable and fit perfect.Pic #3 is my buddy driving and he's you're height.Hope this helps. :cool:
 

Attachments

  • seats installed.jpg
    seats installed.jpg
    83.6 KB · Views: 98
  • finished paint dr side 2.jpg
    finished paint dr side 2.jpg
    96.3 KB · Views: 86
  • IMG_0082 (1).jpg
    IMG_0082 (1).jpg
    100.8 KB · Views: 84
  • IMG_0077.jpg
    IMG_0077.jpg
    129.3 KB · Views: 79

SavageBurro

Contributor
Sr. Member
Joined
Aug 12, 2013
Messages
594
I had some 91 xj seats mounted as low as possible and didn't like them. They were ok but I felt they sat too high for me. (I'm 6'2") So I'm going to swap in very low profile sentra seats and see how they do. I don't know where you're at but you're more than welcome to have my xj seats with sliding brackets / hardware all mounted. I was just going to chuck em. Theyre gray and don't need reupholstered.
 

SavageBurro

Contributor
Sr. Member
Joined
Aug 12, 2013
Messages
594
Btw... the newer xj and tj seats are way more comfy than the old style I have. Not sure how low you can get em though.
 
Top