• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Jeep seats. Please help!

Robster

New Member
Joined
Aug 4, 2015
Messages
36
Hey guys I have a 74 bronco and I am looking for some seats that I can do a custom upholstery on. I would buy new but can't find any unupholstered. anyway would seats from a jeep wrangler or Cherokee fit good and low enough? I can reuse the seat brackets from my Corbeau seatsI have now f that works better. Please let me know if you have any better seat options. I am 6'1" and need a low seat option. Thanks a million.
 

71broncman

Sr. Member
Joined
Sep 6, 2009
Messages
410
Loc.
Maysville, Ky
Having owned a Cherokee in the late 90's I would not recommend using the uncomfortable seats out of one of those. From talking to older Wrangler owners those seats are not much better. Some like the buckets from a Ranger pickup as well as the Probe seats. I was at the local P-N-P looking for Probe seats and stumbled across a pair of Recaro's in a Merkur that I have in mine. I had to adapt sliders to get them as low to the floor as possible, but, I still have to duck to see traffic lights under the windshield frame. What's wrong with the Corbeau seats you have in it now? If you're going to reupholster anyway why not those?
Mark.
 

Bferrari

Sr. Member
Joined
Mar 6, 2013
Messages
857
I too was in the same situation. I knew that I was going to do custom upholstery in my Bronco and wasn't a big fan of the aftermarket seats. I went to my local junk yard and sat in about every vehicle in the lot. I ended up with seats out of a Toyota celica which end up being about 2 inches lower than the stock seats. The also sit very comfortable in my opinion. The seat brackets are very simple to make and it ends up being a very clean installation. You can check my build thread and see the seats and brackets that I used.

http://classicbroncos.com/forums/showthread.php?t=234723
 
Top