• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Jerry can mount ideas?

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
Thanks for the latch explanation and pictures. I hope you don't mind if I use your idea. I was looking for something clean and integrated too, that solves my bumper design hang up. Now I'm out of excuses and need to cut metal. Oh wait, I can still be lazy while ordering the latches!

The Conferr jerry can holder was the one I was trying to describe, but I couldn't think of the name. My business partner had one on his Jeep along with a Conferr cage. They made some good stuff (Conferr that is), are they still around?

I saw these recently at a local 4X4 shop. Similar concept:

jerrycanrackview1.jpg


jerrycanrackview2.jpg

That is the exact design of my conferr one ..cept mine has a conferr sticker on it! ;D
 

fungus

Bronco Guru
Joined
May 27, 2009
Messages
1,548
Loc.
Kaneohe Bay, Oahu
Go to a military surplus store and look for a plastic tan jug that looks similar to a fuel can but is meant for only water. You can tell the difference because they only have one handle on the top versus the typical two or three handles for fuel and the cap is a smaller than a fuel jug cap. Not sure what you would pay for them but it is nice to have two different style of jugs to tell the difference between fuel and water. Believe me, in the Army we have two different styles for a reason. Not everyone will go get the water jug when you tell them you need water...

Check out this link to US Cav: https://www.uscav.com/productinfo.aspx?productid=9556&TabID=548&cs=1

Or you can follow a USMC 7 ton until your lucky enough to have one fall off in front of you! I spun around and picked it up...;D
 
OP
OP
rtreads

rtreads

Sr. Member
Joined
May 13, 2008
Messages
690
Loc.
5280
Thanks for the latch explanation and pictures. I hope you don't mind if I use your idea. I was looking for something clean and integrated too, that solves my bumper design hang up. Now I'm out of excuses and need to cut metal. Oh wait, I can still be lazy while ordering the latches!

The Conferr jerry can holder was the one I was trying to describe, but I couldn't think of the name. My business partner had one on his Jeep along with a Conferr cage. They made some good stuff (Conferr that is), are they still around?

I saw these recently at a local 4X4 shop. Similar concept:

jerrycanrackview1.jpg


jerrycanrackview2.jpg

How does this bracket release the can? Do you unscrew the little piece of angle off a threaded rod that has a clamp over the handle?
 

bigmuddy

Contributor
Bronco Guru
Joined
Dec 28, 2004
Messages
8,071
Loc.
Marthasville Missouri
I wonder who manufactures that can? they look like the old blitz cans, which leaked pretty good when it gets hot out and was a devil to pour from. This can looks to have a bleed port which would make it pour faster? The NATO cans are far superior as far as leaking and pouring but you need to find an original NATO spout which is hard to do.

Ben
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
this is my plan for my 5½ gallon JAZ can eventually.
 

Attachments

  • DSCN1319.JPG
    DSCN1319.JPG
    148.8 KB · Views: 163
  • DSCN1320.JPG
    DSCN1320.JPG
    156.9 KB · Views: 145
OP
OP
rtreads

rtreads

Sr. Member
Joined
May 13, 2008
Messages
690
Loc.
5280
this is my plan for my 5½ gallon JAZ can eventually.

I like how simple it is. Though I need access to lower the tailgate too much often to let the dog in and out. That would be hard taking that out all the time. But it looks super simple!

Just be careful of how low it is... that can wont take much of a hit before it splits open.
 
OP
OP
rtreads

rtreads

Sr. Member
Joined
May 13, 2008
Messages
690
Loc.
5280
I found these straps on ebay.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220635993285&ssPageName=STRK:MEWNX:IT

I think they will work better because the new jerry cans dont have the weld seam around the bottom. They have it down the middle. So, there would be no way for the Quadratec bracket to grab the bottom of the can. And these mounts were $20 for the 2 cans, and quadratec are $29 per can.

I will just cut and modify these mounts to fit. They lock too whick would be really cool when driving around town!
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
i don't plan on having it very low, and i can't do extreme wheeling anymore anyway. the bottom will be supported all around anyway with square tubing, cradle style.
 

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
i don't plan on having it very low, and i can't do extreme wheeling anymore anyway. the bottom will be supported all around anyway with square tubing, cradle style.

Ya, if you look at the pic of my old jeep the "basket" that is holding that blue 5 gal square water jug was made out of square tubing. It was a "standard" basket that came with Cross bumpers as an option.

I later had Mike make a custom basket to hold the square jug properly. I had the basket made deeper and it worked real well.

I will be adding that style of basket to my Proto Fab bumper so that I can carry the same 5 gal jug with the spout of back!

I really like being able to camp off the back of the truck, catch a drink or rinse my hands on the trail. I have found 5 gals of water works well for a weekend of wheeling and camping. I always carry 2 full camelbacks and other water as well if I know I will not be near a campground. Having that water off the back is perfect for me!;D
 
OP
OP
rtreads

rtreads

Sr. Member
Joined
May 13, 2008
Messages
690
Loc.
5280
Ya, if you look at the pic of my old jeep the "basket" that is holding that blue 5 gal square water jug was made out of square tubing. It was a "standard" basket that came with Cross bumpers as an option.

I later had Mike make a custom basket to hold the square jug properly. I had the basket made deeper and it worked real well.

I will be adding that style of basket to my Proto Fab bumper so that I can carry the same 5 gal jug with the spout of back!

I really like being able to camp off the back of the truck, catch a drink or rinse my hands on the trail. I have found 5 gals of water works well for a weekend of wheeling and camping. I always carry 2 full camelbacks and other water as well if I know I will not be near a campground. Having that water off the back is perfect for me!;D

I agree! I feel that having water off the back, and that easy to get to, will make being in the back country a lot less stressful. No digging, or moving crap to get to the water.
 
Top