Just bought a Dennis Carpenter body. Anyone need measurements or more info?

[skrit]

Bought it last week. Picked it up locally.

Pictures:
https://drive.google.com/drive/folders/1DRhx4xGGgHRPbm79q_FxaxBPbHp1dv7G?usp=sharing

Related post here:

https://classicbroncos.com/forums/t...body-paint-ecoat-caution.330878/#post-3635345

It's currently on it's side for underbody paint and coating. I plan to do a master measurements diagram because these have been asked for for years and over hundreds of posts with the same old posts being referenced.

 

[dougsride]

distance between tail light housings for tailgate gap and also between the bed sides at the upper fender lip . or the distance of the middle brace and the back brace across the cab in pictures two and three. thanks. Also hello from down here in Fayetteville!

 

[skrit]

distance between tail light housings for tailgate gap and also between the bed sides at the upper fender lip . or the distance of the middle brace and the back brace across the cab in pictures two and three. thanks. Also hello from down here in Fayetteville!

58-1/8" inside to inside of tail light housing edges at bottom cross member.

58-1/16" inside to inside of tail light housing edges at top.

56" inside to inside tailgate stake pockets bottom and top.

Note pictures are from it sideways.

distance between tail light housings for tailgate gap and also between the bed sides at the upper fender lip . or the distance of the middle brace and the back brace across the cab in pictures two and three. thanks. Also hello from down here in Fayetteville!

 

[dougsride]

thanks

 

[Steve83]

See if it matches each of these:

 

[skrit]

See if it matches each of these:

No idea. I've seen those diagrams for years and honestly... they are hard to read and generally suck. Wait till you see what I come up with.