• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

k bar s just got dropped.

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
The Dust Devil just arrived for a freshen up...I did confirm it is a U15; 200 6 cyl with Clifford head, valve cover and header. Mark in San Diego, Beach City Broncos
 

Attachments

  • DSC_7793[1].jpg
    DSC_7793[1].jpg
    94.6 KB · Views: 293
  • DSC_7795[1].jpg
    DSC_7795[1].jpg
    74.7 KB · Views: 306
  • DSC_7796[1].jpg
    DSC_7796[1].jpg
    50.7 KB · Views: 289
  • DSC_7799[1].jpg
    DSC_7799[1].jpg
    77.5 KB · Views: 278
  • DSC_7798[1].jpg
    DSC_7798[1].jpg
    90.1 KB · Views: 317
  • DSC_7791[1].jpg
    DSC_7791[1].jpg
    74.8 KB · Views: 317
  • DSC_7792[1].jpg
    DSC_7792[1].jpg
    72.7 KB · Views: 251
  • DSC_7794[1].jpg
    DSC_7794[1].jpg
    62.4 KB · Views: 265

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
so how does the hot rodded 6, compare to a stock small block v8?
wish the old Kayline tops were still made.
 

hucklburry rev2

Sr. Member
Joined
Jan 17, 2006
Messages
772
so how does the hot rodded 6, compare to a stock small block v8?
wish the old Kayline tops were still made.

Stock specs like on a 289 were around 126hp and 220ft/lb. Stock 170 was like 90hp and 146ft/lb.

I built a bit of a 250 six around 140hp on paper and has a torquey cam, probably over 240ft/lb?? For about another $1000 I can get a new intake and carb and be pushing 200hp...its an Australian Crossflow engine with aluminum head, but the engine talked about here should be similar with the head it has on it - at least similar to a stock 302, with a nice torque curve

So a mild six would be similar to a stock original 302, and probably get a little better mpg due to torque curve, based on people I know with sixes....

But dollar for dollar building up a 302 will obviously have more torque and HP, but a built six can be a nice ride, especially going to a 200 over the original 170
 

squeezer

New Member
Joined
May 12, 2016
Messages
33
Cant explain it but this truck just has “Something”...

Nothing against the $300K trucks out there but they don’t jump out like this thing does.

Just ��
 
OP
OP
M

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
k bar s

Odometer reads 528 miles. I know the current owner has never driven this truck. He has owned it 7 or 8 years. Could those be original miles since k bar s build?
 

chrlsful

Bronco Guru
Joined
Oct 21, 2009
Messages
1,448
Stock specs like on a 289 were around 126hp and 220ft/lb. Stock 170 was like 90hp and 146ft/lb.

I built a bit of a 250 six around 140hp on paper and has a torquey cam, probably over 240ft/lb?? For about another $1000 I can get a new intake and carb and be pushing 200hp...its an Australian Crossflow engine with aluminum head, but the engine talked about here should be similar with the head it has on it - at least similar to a stock 302, with a nice torque curve

So a mild six would be similar to a stock original 302, and probably get a little better mpg due to torque curve, based on people I know with sixes....

But dollar for dollar building up a 302 will obviously have more torque and HP, but a built six can be a nice ride, especially going to a 200 over the original 170
put the 4.1/250 in mine as well. The 300/4.9 would have been the perfect instal (if moved back a few inches due to nose weight). Every automotine Q is answrd by "What is the specific application?" and there's my answ to the 70% off / 30% on rd bronk. i6 has low rev tq that comes on sooner than bent8. I do not like to spin tires on the loose stuff (drive on tq not HP).
K bar S was the 1st co I bought after mrkt stuff in the '80s. Thought they were the real deal. Guy who sponsors this site sold me a 1/2 cab & shipped 1k mi for 200$...
Is dis da same worl ? aahahahaa
 
Top