Keyed Hot Wire on Duraspark

[Ohio Bronco 21]

I was wondering what the easiest place is to run the wire from my Duraspark II Ignition Module. The wire that is to be run to a keyed hot position. I plan on using a stock ignition in my dash so I really didnt want to splice into it. Thanks

 

[Quick & Dirty]

The ignition switch has a stud and nut on the back. Put a ring terminal on the end of your wire and add it to the stack.

 

[Ohio Bronco 21]

Well, Thats easy enough. Thanks.

 

[broncnaz]

If you have a blue wire coming out of the firewall right near the thrtttle bellcrank that is unused thats a good candiate as well.

 

[Ohio Bronco 21]

If you have a blue wire coming out of the firewall right near the thrtttle bellcrank that is unused thats a good candiate as well.

Good to know. Right now I have no harness