Krawlers Edge cage

[NYC Bronco]

I'm installing mine tomorrow and I realize ti comes with no instructions, which isn't a big deal for the cage but I could use some guidance for all the assembly pieces for the seat belts. Any one have a PDF or other format copy? They provided a QR code to download instructions but the link is broken so no luck there.

 

[bronco loco]

How did the install of the cage go?

 

[NYC Bronco]

So far it came out great.

now I have to install the seat belts

 

[toddz69]

Pretty truck too!

Todd Z.

 

[ngsd]

I have one I put in one of mine too. They are pretty nice and fit well. Nice Bronco you have there.

 

[SC74]

This is the same cage I plan on getting. Your Bronco and cage look very nice!

 

[sprdv1]

Looking good..

Never hesitate to call them peeps you bought from if no instructions were provided...

So far it came out great.

now I have to install the seat belts

 

[NYC Bronco]

So The Seatbelts went in easy enough. the rear ones flap a bit, think I have an handle on that but what I'm wondering is anyone else has had the seat belt units where they attached the cage at the should do this:

https://drive.google.com/file/d/12Y-uLRuLexhdjoxWRatISAldbJ2CgWEN/view?usp=sharing

they are one there tight, there is just a gap and they make an awful racket at speed. anyone else had to correct this?

 

[bigmuddy]

Any way you can "brace" it from behind with a large washer to firm it up?

Maybe a very large fender washer?

 

[72_EB]

Looking good! I did one a couple years ago, but I don't remember that seat belt gap. I think bigmuddy is on the right track with some washers or spacers from the hardware store to take up the slack.

 

[NYC Bronco]

I sent a video to Kincer and in turn they forwarded it to Resto Belts are both say the install looks good and a little play is designed in and you can correct to your taste. I bought some clear at Home Depot, cut 1/4 rings and slipped them into place to reduce is not eliminate the flapping. I also feel like the belts themselves flap a bit so I velcro'd them to the rear cage posts to hold them in place. We will see how that goes.

 

[ngsd]

I would think the play is needed but something like a felt washer similar to the one on the clutch bell crank assembly would do the trick. Very nice.

 

[NYC Bronco]

I would think the play is needed but something like a felt washer similar to the one on the clutch bell crank assembly would do the trick. Very nice.

I left the play on the drivers and passenger, they don't flap as much at speed.

 

[FramedCoyotes]

Hey Everyone, this thread goes back aways but I thought I would post our Cage Install Instructions up just incase someone needed them. If you have questions and need to reach out please do. 865-297-3478. Thanks, BeeBo. https://www.dropbox.com/s/dwjf29kus0yjb7a/Sport Cage Instructions V2.1.pdf?dl=0

 

[Scott B]

Has anybody removed the half cab and left the bulkhead in place and instale a

The Krawlers Edge Family Sport Cage ?​

​