• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LED gauge installation

tmorris1076

Jr. Member
Joined
Mar 21, 2013
Messages
66
Can someone who has installed the LED gauges tell me where exactly they tied the red power into power on backside of lights switch from dash? There are 4 pair of wires coming from switch and I want to make sure I splice the right wire.

qa3y2any.jpg



Sent from my iPad using Tapatalk HD
 
OP
OP
tmorris1076

tmorris1076

Jr. Member
Joined
Mar 21, 2013
Messages
66
Yes. Got some bs answer to splice into any wire. Might be right but electrical scares me a little.
 
OP
OP
tmorris1076

tmorris1076

Jr. Member
Joined
Mar 21, 2013
Messages
66
Got this sorted. Once everything was grounded properly it worked like a charm. I spliced into the brown wires which appear to operate the tail lights. This apparently has no affect on dimming which is a noted issue with these things.

Ill post pics later


Sent from my iPad using Tapatalk HD
 
Top