Lets See Your Floor Shifter Set Ups

[JeepGuy]

Getting to that point in the rebuild where I have to make a decision on where to put the shifter. I'm running twin sticks on a Dana 20 so I have that to work around.

Options are wide open at this point. It had a beat up B&M floor cable shifter in it before. Not sure I want to go back to that specific model.

 

[BanditBronco]

I don't have a finished picture of my install but here is a during. Because of my extra wide seats and cage design I have a nice small section in between the seats. I used a Goat Built ArtCarr mount with cup holders that works well for my set up. Only downside if you look at it that way, is the cup holders fit a water bottle or coors light can only so you can't stick your yeti mug in it.

 

[jim3326]

I'd show mine but I don't think a gear-banger is what you're looking for!;D

 

[MarsChariot]

It depends on which transmission you will be installing.

 

[JeepGuy]

C-4 Auto. Dana 20 twin sticks.

 

[JeepGuy]

I don't have a finished picture of my install but here is a during. Because of my extra wide seats and cage design I have a nice small section in between the seats. I used a Goat Built ArtCarr mount with cup holders that works well for my set up. Only downside if you look at it that way, is the cup holders fit a water bottle or coors light can only so you can't stick your yeti mug in it.

Sounds like those cup holders are perfect. lol. Thinking of building something similar but extending the area around the cup holder for a few different thing.

You bring up a real good point though. Kinda need to know what seats I'm running to determine how much room there will be.

 

[Glass Pony]

Here's my Art Carr.

 

[JWMcCrary]

Custom console for C4 shifter, Art Carr - Winters

 

[JeepGuy]

Custom console for C4 shifter, Art Carr - Winters

Where did you find that? My thoughts are along those lines, and trying to incorporate something that goes a bit more towards the dash to hold all the normal crap like cell phones, glasses, etc..

 

[romegadave]

Very nice Glass Pony!!!!!!!!!!!!!

 

[Glass Pony]

Very nice Glass Pony!!!!!!!!!!!!!

Thanks!!

 

[gnsteam]

Have you looked at the Lokar cable shifter, that’s list on James Duff’s web site?

 

[JeepGuy]

Have you looked at the Lokar cable shifter, that’s list on James Duff’s web site?

I have not, but I will be now. Leaning towards their new shocks anyway, so may as well get it at the same time if it works.

 

[JeepGuy]

Here's my Art Carr.

I like the art car too. The ability to incorporate it on top of a built center console is tempting.

 

[Deano]

Not a twin stick but it’s on passenger side and works well with the 70 mustang shifter with the metal rod not cable

 

[Howard2x4x4]

Not a twin stick but it’s on passenger side and works well with the 70 mustang shifter with the metal rod not cable

Deano, I'm diggin' on that big time! Problem is, I have a J shift TC and from what I've been told, the T type shifter will not work with that TC. Nicely done, young fellar!

 

[Scoop]

Deano, I'm diggin' on that big time! Problem is, I have a J shift TC and from what I've been told, the T type shifter will not work with that TC. Nicely done, young fellar!

If you just want the look you can probably adapt the “T” handle to a J-shift lever.

 

[jmangi62]

A couple pics of my nv3550 and twin sticks from JB Fab.

 

[Howard2x4x4]

If you just want the look you can probably adapt the “T” handle to a J-shift lever.

That's a really good idea Scoop, Thanks, and Merry Christmas y'all!

 

[txtruk15]

jb fab twin sticks with an atlas and keeping on the nv 3550 theme....using the B&M shifter