Lets see your LIGHTS :)

[68ford]

I just changed all my light to LEDs.

are you headlights LED as well? If so, what brand are you runing and how do you like them?

 

[daddycreswell]

Old scool KCs.

Man I wish I had some of those. I'd throw some of these on them.

 

[naneumranch]

20 inch LED with a roller winch mount and 7 inch lucky 13 headlights

 

[BajaBronco]

I know they're not on the bumper, but I've always liked the spots that were on my previous rig. They were made by Unity. I removed them and have them to use "one day", but as cool as they look I can't bring myself to install them on my current ride for fear that they may get knocked off on the trail.
View attachment 389327

I have a set of these squirreled too as I really want to put them on a Bronco some day.

A great look Plus now Unity can set you up with some really trick bulb options - our chase Suburban for NORRA uses them and they work awesome!

 

[Dusty]

20" Rigid LED bar on my home-made prerunner front bumper, and Truck-Lite LED headlights...

 

[House]

Not unlike Andrew's Tampico Baja on page 1, but another view of vintage Cibié 35's on a Baja Bronco...

 

[Montoya]

Smile!

 

[Slowleak]

Cibie 35's for me. I have fog and driving lens.

 

[RPM289]

(2) 9.9" Lightforce Blitz 240
(1) WoneNice 52" 300W LED Driving Light Bar
(8) VisionX 3W LED RockLights
(2) Euro Motorcycle Headlights with 12v relay harness.

WOW You could melt the snow with those bad boys!!!!!! WOW WOW

 

[sykanr0ng]

Man I wish I had some of those. I'd throw some of these on them.

If I had some of those I'd buy lights just to put them on.

 

[daddycreswell]

If I had some of those I'd buy lights just to put them on.

I seen them on EBay, got to doing something else and forgot about them. Like a fool I let the. Get gone for 19.99, they were NOS. probably won't ever find another set. Kicking myself.

 

[RPM289]

Lots of cool set ups out there I think I will go 2 on frt bumper and 4 on top. You all have some nice rigs can't wait to get mine on the road!!!

 

[Prizefighter]

(2) 9.9" Lightforce Blitz 240
(1) WoneNice 52" 300W LED Driving Light Bar

How did you mount your 52" light bar Motoman? I have this same bar and brackets and it won't work with my windshield. It either hits my wipers or the spacing is wrong for the windshield frame.

 

[motoman]

How did you mount your 52" light bar Motoman? I have this same bar and brackets and it won't work with my windshield. It either hits my wipers or the spacing is wrong for the windshield frame.

I had an old set of KC light mounts that I welded a flat plate to mount it..... I now need to make a mount where form meets function. I will post up when I get them made....

 

[soms007]

Hellas on an old school push bar.

 

[phred]

KC daylighters and hellas in a very dusty truck.

Sent from my iPhone using Tapatalk

 

[RPM289]

So many options! Any of you guys sell your old lights when u upgrade to led,s?

 

[Pa PITT]

I'LL SELL MINE, I think, I'm getting a light bar on top over my cab..
I don't want to sell mine if I don't get the light bar.
..........
...You ask too see our lights on our Broncos.. I use my Bronco a little more differently than most of you Guys & Gals do. I claim to be a farmer but really now I'm just an old Man playing with my Dog Taco & out in the pastures. My top overheads are for us too see forward. Checking cattle or pig hunting .. But in the back My Bronco is more of a utility vehicle. I have extra LED back up lights just over the bumper. THEN I've got a set of Tractor Utility light on top of my headake rack .. These 2 give a good quality light for working on equipment at night . Or loading up a pig .. Extra nice to have enough light to close a gate at night.
... I'll swear I use my rear lights to a bigger advantage. More than I use the front facing overheads ..
... I'LL ADD ALSO SINCE MY BRONCO has the 4BT cummins in it . I have a 120amp big Delco alt on it. I never seem to be short on power to run all my lights.

 

[Kansas Bronco]

Here's my light set up. Added four lights to the roof rack (DiamondRax) and two lights to the bumber (Hanson). Converted the choke pull switch on the dash to an aux lights on/off switch w/ a stock bezel when I moved to EFI.

Rig is almost through a 2.5 year restoration. When I have it back, will try to post a comprehensive. This is my first post with a picture, so hopefully this works.

 

[RPM289]

I'LL SELL MINE, I think, I'm getting a light bar on top over my cab..
I don't want to sell mine if I don't get the light bar.
..........
...You ask too see our lights on our Broncos.. I use my Bronco a little more differently than most of you Guys & Gals do. I claim to be a farmer but really now I'm just an old Man playing with my Dog Taco & out in the pastures. My top overheads are for us too see forward. Checking cattle or pig hunting .. But in the back My Bronco is more of a utility vehicle. I have extra LED back up lights just over the bumper. THEN I've got a set of Tractor Utility light on top of my headake rack .. These 2 give a good quality light for working on equipment at night . Or loading up a pig .. Extra nice to have enough light to close a gate at night.
... I'll swear I use my rear lights to a bigger advantage. More than I use the front facing overheads ..
... I'LL ADD ALSO SINCE MY BRONCO has the 4BT cummins in it . I have a 120amp big Delco alt on it. I never seem to be short on power to run all my lights.

Cool, How do you like the 4BT in it? Toying with the idea on my 70! Can I get some pic's?

Mike